CP700 EC
带蓄能器的紧凑型液压泵
设计用于操作高达700bar(70MPa)的液压工具
(无显示)
CP700 EC
Compact Hydraulic Pump with Accumulator
Designed to operate hydraulic tools up to 700bar (70MPa)
(without display)
技术特征
?轻巧,紧凑,坚固的结构
?右撇子或左撇子的人体工学设计
?可以携带带有额外口袋的特殊运输袋,
带肩带或系在腰带上
?可以
通过平面
和圆形表面上的磁铁将遥控单元连接到带有夹具支架的设备,皮带或肩带,按钮(?18.7mm)上
?由于高回程能力,活塞快速返回
?电子传感器压力控制
?高性能锂离子蓄电池
?蓄电池上的充电指示灯
?双活塞技术,用于快速高压进给
– 低压<100 bar范围内的容量:1.2 lit./min。
– 容量范围在高达700 bar的压力范围内:0.2 lit./min。
– 工作压力:…………………. 700 bar(70 MPa)
– 电源:……………………………………. 200 W
– 蓄电池电压:………………. 18,0 V DC
– 蓄能器容量:……………… 3,0啊
– 使用范围:…………………………. -20°C / + 55°C
(集成冷却系统)
控制和监控功能:
?受控电机驱动,可延长传动,发动机
和电池的使用寿命
?温度监控
?手动或自动返回
?约5分钟后自动省电模式。
?设备和遥控器上的LED指示(1.5米)
?可以在内部存储器
和PC上保存所有周期和错误指示
?通过电子压力
传感器和自动压力软管补偿精确,准确地重复压力设定
?由于持续监控剩余
电池电量,不再需要中止按下循环
?包括软件
?集成维护管理
描述 | 订单号。 | 外形尺寸 | Weigth |
---|---|---|---|
液压泵 | CP700EC | 480 x 250 x 250毫米 | 7,7公斤 |
Technical Characteristics
? Light, compact and robust structure
? Ergonomic design for right or left handers
? Possibility to carry the special transportation bag with additional?pockets,
with a shoulder strap or attached to a belt
? Possibility to attach the remote control unit to the apparatus, belt or shoulder
strap with a clamp support, on buttons (? 18.7 mm) through a magnet on flat
and rounded surfaces
? Rapid return of piston, thanks to high return capacity
? Electronic sensor pressure control
? High performance lithium ion accumulator
? Charge indicator on the accumulator
? Double piston technology for rapid high pressure feed
– Capacity within the range of low pressures < 100 bar: 1.2 lit./min.
– Capacity within the range of pressures up to 700 bar: 0.2 lit./min.
– Operating pressure: …………………. 700 bar (70 MPa)
– Power: ……………………………………. 200 W
– Accumulator voltage: ………………. 18,0 V DC
– Accumulator capacity: ……………… 3,0 Ah
– Range of use: …………………………. -20°C / +55°C
(integrated cooling system)
Control and monitoring functions:
? Controlled motor drive for lifetime increase of transmission, engine
and battery
? Temperature monitoring
? Manual or automatic return
? Automatic power saving mode after about 5 min.
? LED indications on the device and the remote control (1.5m)
? Possibility of saving all the cycles and error indications in internal memory
and on the PC
? Precise, accurately repeatable pressure setting through electronic pressure
sensor and automatic pressure hose compensation
? No more aborted pressing cycles due continuously monitoring the residual
battery charge
? Software included
? Integrated maintenance Management
Description | Order No. | Dimensions | Weigth |
---|---|---|---|
Hydraulic pump | CP700EC | 480 x 250 x 250 mm | 7,7?kg |