电场探头EMSense EMF探头插卡7007-002型号

 

ETS-Lindgren EMSense EMF探头插卡可为ETS-Lindgren的激光驱动电场探头提供与EMCenter Modular RF平台的接口。

  • ETS-Lindgren EMSense EMF探头插卡为ETS-Lindgren的激光驱动电场探头提供了与EMCenter Modular RF平台的接口。

    每个EMSense模块化插卡都支持一个ETS-Lindgren电场探头。TILE完全支持EMSense和ETS-Lindgren EMC现场探头和其他测试自动化软件包。请联系ETS-Lindgren获取更多信息。

  • ELECTRIC FIELD PROBES EMSense EMF Probe Plug-in Card Model 7007-002

     

    ETS-Lindgren EMSense EMFProbePlug-in Card provides an interface for ETS-Lindgren’s laser-powered E-field probes to the EMCenter Modular RF Platform.

  • ETS-LindgrenEMSenseEMF Probe Plug-in Card provides an interface for ETS-Lindgren’s laser-powered E-field probes to the EMCenter Modular RF Platform.

    Each EMSense Modular Plug-in Card supports one ETS-Lindgren E-field probe. EMSense and ETS-Lindgren EMC field probes are fully supported by TILE and other test automation software packages. Please contact ETS-Lindgren for additional information.

主要特点

    • 为ETS-Lindgren激光动力电子探针提供接口
    • 宽频率和动态范围
    • 紧凑的设计

特征

宽频率和动态范围

EMSense与所有ETS-Lindgren EMC电场激光探头完全兼容，频率范围为10 kHz至40 GHz，动态范围为0.5至800 V / m。

紧凑的设计

每个EMSense插卡都占用EMCenter平台的一个插槽，允许额外的插槽被模块化插卡占用，用于定位控制器，多个RF开关等。

产品规格

电气规格

规格HI-6122（可选电场探头）HI-6105（可选电场探头）HI-6153（可选电场探头）
发现各向同性（X，Y和Z轴读数）各向同性（X，Y和Z轴读数）各向同性（X，Y和Z轴读数）
校准频率范围10 kHz至1 GHz100 kHz至6 GHz10 MHz至40 GHz
频率响应（典型值）10 kHz至30 kHz +0.5， – 2.5 dB

30 kHz至1 GHz±1.0 dB
500 kHz至2 GHz +1.0，-2.5 dB

2至5 GHz +3.5，-4.0 dB
5至6 GHz +1.0，-6.0 dB
10至100 MHz + 3.0，-4.0 dB
100 MHz至1 GHz +3.0，-0.50 dB
1至18 GHz +4.0，-2.0 dB
18至40 GHz +3.0，-4.5 dB
具有校正的频率响应±0.9 dB±0.9 dB10 MHz至18 GHz±0.9 dB
18至40 GHz±1.1 dB
动态范围2.0至800 V / m（单量程）0.5至800 V / m（单量程）2.0至800 V / m（单量程）
决议0.01 V / m0.01 V / m0.01 V / m
各向同性偏差在@ 400 MHz时±0.5 dB在@ 400 MHz时±0.5 dB±1.0 dB <18 GHz
线性@ 27 dB @ 27 MHz@ 27 dB @ 27 MHz@ 1 dB时±0.5 dB
采样率60个样本/秒最大值60个样本/秒最大值60个样本/秒最大值
超载承受
> 1500 V / m CW
> 1500 V / m CW
> 1500伏/米CW

物理规格

规格7007-002（插卡）HI-6122（可选电场探头）HI-6105（可选电场探头）HI-6153（可选E-场探头）
外形尺寸1个插槽住房：

32毫米x 32毫米x 32毫米

（1.25英寸x 1.25英寸x 1.25英寸）

住房：

32毫米x 32毫米x 32毫米

（1.25英寸x 1.25英寸x 1.25英寸）

住房：

76毫米x 51毫米x 51毫米

（3.0 in x 2.0 in x 2.0 in）

传感器保护帽高度N / A36毫米（1.42英寸）43毫米（1.69英寸）348毫米探头长度x 58.4毫米探头宽度（13.7英寸x 2.3英寸）
重量N / A80克（2.82盎司）80克（2.82盎司）360克（12.7盎司）
安装N / A1/4“20 – UC内螺纹1/4“20 – UC内螺纹1/4“20 – UC内螺纹
物理接口N / A双工光纤（62.5微米多模）
FC用于激光，Integral 1m光缆		双工光纤（62.5微米多模）
FC用于激光，Integral 1m光缆
双工光纤（62.5微米多模）
FC用于激光，Integral 1m光缆
温度范围0°C至+ 35°C

（32°F至+ 95°F华氏度）
+10至+ 40°C（+ 50°F至+ 95°F）
+10至+ 40°C

（+ 50°F至+ 95°F）
+10至+ 40°C

（+ 50°F至+ 95°F）
相对湿度10至90％（非冷凝）5至95％（非冷凝）5至95％（非冷凝）5至95％（非冷凝）
功率（由7007-002提供）N / A激光功率激光功率激光功率

Key Features

    • Provides an Interface for ETS-Lindgren Laser-Powered E-field Probes
    • Wide Frequency and Dynamic Ranges
    • Compact Design

Features

Wide Frequency and Dynamic Ranges

EMSense is fully compatible with all ETS-Lindgren EMC E-field laser-powered probes, covering a frequency range of 10 kHz to 40 GHz and a dynamic range of 0.5 to 800 V/m.

Compact Design

Each EMSense plug-in card occupies one slot in the EMCenter platform, allowing additional slots to be occupied by modular plug-in cards for positioning controllers, multiple RF switches and more.

Specifications

Electrical Specifications

SpecificationHI-6122 (Optional E-field Probe)HI-6105 (Optional E-field Probe)HI-6153 (Optional E-field Probe)
DetectionIsotropic (X, Y and Z AxisReadings)Isotropic (X, Y and Z Axis Readings)Isotropic (X, Y and Z Axis Readings)
Calibrated Frequency Range10 kHz to 1 GHz100 kHz to 6 GHz10 MHz to 40 GHz
Frequency Response (Typical)10 kHz to 30 kHz +0.5, – 2.5 dB

30 kHz to 1 GHz ± 1.0 dB
500 kHz to 2 GHz +1.0, -2.5 dB

2 to 5 GHz +3.5, -4.0 dB
5 to 6 GHz +1.0, -6.0 dB
10 to 100 MHz + 3.0, -4.0 dB
100 MHz to 1 GHz +3.0, -0.50 dB
1 to 18 GHz +4.0, -2.0 dB
18 to 40 GHz +3.0, -4.5 dB
Frequency Response with Correction± 0.9 dB± 0.9 dB10 MHz to 18 GHz ±0.9 dB
18 to 40 GHz ±1.1 dB
Dynamic Range2.0 to 800 V/m (Single Range)0.5 to 800 V/m (Single Range)2.0 to 800 V/m (Single Range)
Resolution0.01 V/m0.01 V/m0.01 V/m
Isotropic Deviation±0.5 dB @ 400 MHz±0.5 dB @ 400 MHz±1.0 dB <18 GHz
Linearity±0.5 dB @ 27 MHz±0.5 dB @ 27 MHz±0.5 dB @ 1 GHz
Sample Rate60 Samples/Second Maximum60 Samples/Second Maximum60 Samples/Second Maximum
Overload Withstand
>1500 V/m CW
>1500 V/m CW
>1500 V/m CW

Physical Specifications

Specification7007-002 (Plug-in Card)HI-6122 (Optional E-field Probe)HI-6105 (Optional E-field Probe)HI-6153 (Optional E-field Probe)
Exterior Dimension1 SlotHousing:

32 mm x 32 mm x 32 mm

(1.25 inx 1.25 inx 1.25 in)

Housing:

32 mm x 32 mm x 32 mm

(1.25 inx 1.25 inx 1.25 in)

Housing:

76 mm x 51 mm x 51 mm

(3.0 in x 2.0 in x 2.0 in)

Sensor Protective Caps Heightn/a36mm (1.42 in)43 mm (1.69 in)348 mm Probe Lengthx 58.4 mm Probe Width(13.7 inx 2.3 in)
Weightn/a80 g (2.82 oz)80 g (2.82 oz)360 g (12.7 oz)
Mountingn/a1/4”20 – UC Internal Thread1/4”20 – UC Internal Thread1/4”20 – UC Internal Thread
Physical Interfacen/aDuplex Optical Fiber (62.5 micron multimode)
FC for laser, Integral 1m optical cable		Duplex Optical Fiber (62.5 micron multimode)
FC for laser, Integral 1m optical cable
Duplex Optical Fiber (62.5 micron multimode)
FC for laser, Integral 1m optical cable
Temperature Range0° C to +35° C

(32°F to +95°F)
+10 to +40° C(+50°F to+95°F)
+10 to +40° C

(+50°F to+95°F)
+10 to +40° C

(+50°F to+95°F)
Relative Humidity10 to 90% (Non-condensing)5 to 95% (Non-condensing)5 to 95% (Non-condensing)5 to 95% (Non-condensing)
Power (Provided by the 7007-002)n/aLaser PowerLaser PowerLaser Power