绝缘平台
产品介绍：
| 玻璃纤维材料制成，重量轻，绝缘性能好，安装简便 新颖设计的平台铸成凹槽型，支撑力大，光滑的滤光板表层，易于清洁 选用其他配件组合成灵活使用的工作平台；如8401-A,8402-B-D | |
| 三角架8401-A 用作于平台上作业口系安全带 建议与8401配置 | |
| 旋转铰链8401-B-D 可使用平台水平30°-180°的角度调整 | |
| 三角架8401-B-D 用作于平台上作业口系安全带 建议与8402-8404配置 |
型号规格：
| 产品编号 | 长度（m） | 安全负荷（Kg） | 重量（Kg） | 三角架 | 旋转铰链 |
| 8401 | 1.22 | 266.8 | 14.5 | A | D |
| 8402 | 1.83 | 226.8 | 16.8 | B | |
| 8403 | 2.44 | 136.1 | 19.1 | B | C |
| 8404 | 3.05 | 124.7 | 21.3 | B |
INSULATED PLATFORMS
Work platforms are designed for maximum safety and ease of installation
Permanent non-slip surface in the work area
Metal castings and components on platforms are made from heat-treated aluminum alloys
Platforms have square channel foot/toe stops for location awareness
Platform width is 10 3/4”
FIXED OR ADJUSTABLE FIBERGLASS PLATFORM
Platform becomes adjustable when used with pivot assembly attachment (See page 314)
Moves 180° under load
If pivot is not used, the platform is non-adjustable
Twin adjustable struts for stability
4’ model will accept tripod rail assembly option
All models will accept the horizontal rail assembly
Complete with braces and chain tightener
CAT NO DESCRIPTION LOAD LIMIT LBS
8401 4’ PLATFORM 500 LBS 32.0
8402 6’ PLATFORM 500 LBS 37.0
8403 8’ PLATFORM 300 LBS 42.0
8404 10’ PLATFORM 275 LBS 47.0
TRIPOD FIBERGLASS RAIL ASSEMBLY
Designed to be used with 42” and 4’ platforms only
Allows linemen to move freely while maintaining their balance when performing rubber glove work
Rail assembly hinges and stores flat on top of the platform by simply removing the keeper pin
The tripod rail is a positioning device that will allow the worker to main-tain proper work positioning and balance
Not to be used as an anchor point – see anchor point tool page 315
CAT NO DESCRIPTION LBS
-A TRIPOD RAIL
TO BE USED WITH CATALOG NUMBERS 8416 AND 8401
WHEN ORDERING ADD THE SUFFIX – A TO THE PLATFORM # 6.0
HORIZONTAL FIBERGLASS RAIL ASSEMBLY
Designed to be used with platforms 4’, 6’, 8’, and 10’ long
The rail assembly hinges and stores on top of the platform by removing the keeper pin
The horizontal rail assembly is a positioning device that will allow the worker to maintain proper work positioning and balance
Not to be used as an anchor point – see anchor point tool page 315
CAT NO DESCRIPTION LBS
-B HORIZONTAL FIBERGLASS RAIL
TO BE USED WITH CATALOG NUMBERS
8401, 8402, 8403, AND 8404
WHEN ORDERING ADD THE SUFFIX -B TO THE PLATFORM # 12.0
PIVOT STYLE ATTACHMENT
Pivot style mounting base can be ordered as an option on adjustable style platforms only
Designed to be used with platforms 4’, 6’, 8’, and 10’ long
Platform can be positioned in 30 degree increments up to 180 degrees under load by loosening wheel tightener.
Two models available – standard and short clearance models
CAT NO DESCRIPTION LBS
-C STANDARD PIVOT STYLE ATTACHMENT
DISTANCE BETWEEN CHAIN BINDERS – 33”
TO BE USED WITH CATALOG NUMBERS
8401, 8402, 8403, AND 8404
WHEN ORDERING ADD THE SUFFIX -C TO THE PLATFORM # 23.0
-D SHORT CLEARANCE PIVOT STYLE ATTACHMENT
DISTANCE BETWEEN CHAIN BINDERS – 21”
TO BE USED WITH CATALOG NUMBERS 8401 AND 8402.
WHEN ORDERING ADD THE SUFFIX -D TO THE PLATFORM # 17.0
TRIPOD RAIL ASSEMBLY, HORIZONTAL RAIL ASSEMBLY, AND PIVOT STYLE ATTACHMENTS CAN NOT BE ADDED TO PLATFORMS PREVIOUSLY PURCHASED
