Insulated Klein-Kurve Wire Stripper/Cutter
11055-INS
- Cuts, strips, loops and gauges both 10-18 solid and 12-20 stranded AWG wire
- Cleanly shears 6-32 and 8-32 screws
- Comfortable curved handles
- Hardened steel with precision ground stripping holes for easy removal of insulation
- Strong gripping serrated nose for bending, shaping and pulling of wire
- Do not use for cutting steel wire
绝缘Klein-Kurve?剥线钳/切割机
11055-INS
- 切割，条带，环和量规均为10-18实心和12-20绞合AWG线
- 干净地剪6-32和8-32螺丝
- 舒适的弧形手柄
- 淬硬钢，带有精密的地面剥离孔，便于拆除绝缘层
- 坚固的锯齿状锯齿，用于弯曲，成型和拉动钢丝
- 不要用于切割钢丝
Guard against electric shock while working on live wires with the Klein Tools Insulated Wire Stripper/Cutter. This tool protects up to 1,000 volts thanks to a dual-layer insulated coating. The dielectric white inner coating is bonded to the tool and the orange outer coating that is flame retardant and impact resistant
Specifications
Application:
Cuts, Strips, Loops and Gauges Wires
Special Features:
Compact and Lightweight, Spring Loaded For Self Opening
Material:
Steel
Insulated:
Yes
Strips and Cuts:
10, 12, 14, 16, 18 AWG Solid (4.0 mm?, 2.5 mm?, 1.5 mm?, 1.0 mm?, 0.75 mm?) 12, 14, 16, 18, 20 AWG Stranded (2.5 mm?, 1.5 mm?, 1.0 mm?, 0.82 mm?, 0.50 mm?)
Screw Shearing:
6-32 and 8-32
Overall Length:
8” (203.2 mm)
Handle Color:
Orange
Handle Finish:
2-Layer
Weight:
0.75 lb (0.34 kg)
UPC:
092644740688
WARNINGS
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Wear approved eye protection.
- Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
使用Klein Tools绝缘剥线钳/切割机在带电导线上工作时防止触电。由于采用双层绝缘涂层，该工具可保护高达1,000伏的电压。电介质白色内涂层粘合到工具上，橙色外涂层具有阻燃和抗冲击性
产品规格
应用：
切割，剥离，循环和量规电线
特殊功能：
紧凑轻巧，弹簧加载自开式
材料：
钢
绝缘：
是
条带和切口：
10,12,14,16,18 AWG实心（4.0mm?，2.5mm?，1.5mm?，1.0mm?，0.75mm?）12,14,16,18,20 AWG绞合（2.5mm?，1.5mm?，1.0mm?，0.82mm?） ，0.50mm?）
螺丝剪切：
6-32和8-32
总长度：
8”（203.2 mm）
处理颜色：
橙子
处理完成：
2层
重量：
0.75磅（0.34千克）
UPC：
092644740688
警告
- 如果工具有可能与带电源接触，则仅使用标有上述官方国际1000伏额定值符号的工具。
- 只要有可能，在工作或周围工作之前，始终要断开线路和设备的电源。Klein绝缘工具的设计只是为了减少工具可能接触带电源的伤害几率。
- 当可能接触带电源时，请勿触摸工具的未绝缘部分或任何导电物体。
- 佩戴认可的眼睛保护。
- 由于水分，薄膜或其他表面污染物具有导电性，因此Klein绝缘工具必须保持清洁，干燥且无任何表面污染物。
- 使用前请务必检查工具。如果绝缘材料以任何方式损坏，则销毁工具。
