Grip for Weatherproof Wire 0.53-Inch Capacity
1611-30
- Round inside jaw contour for weatherproof coated copper wire
- Notches in jaw provide firm grip on insulation
- Max Safe Load of 4500-Pound (2041 kg)
- NOTE: Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable
防风雨导线0.53英寸容量的拉缆夹
1611-30
- 圆形内颚轮廓,用于防风雨涂层线
- 下颚的凹口可以牢固地抓住绝缘层
- 最大安全载荷4500磅(2041千克)
- 注意:由于可提供各种类型的防风雨涂层,选择合适的夹具取决于电缆的外径
Klein Tools’ 1611 Series Chicago Grips have a round inside jaw contour designed to hold weatherproof strand and solid coated wire. They also have a notched jaw to provide a firm grip on insulation. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Specifications
Cable Type:
Copper
Cable Diameter:
0.31” to 0.53” (7,.87 to 13.46 mm)
Jaw Type:
Notched
Jaw Length:
4.75” (120.7 mm)
Maximum Safe Load:
4500 lb (2041 kg)
Weight:
3.4 lb (1.5 kg)
UPC:
092644470035
WARNINGS
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
Klein Tools的1611系列Chicago Grips具有圆形内颚轮廓,设计用于固定防风雨线和实心涂层线。它们还有一个缺口下颚,可以牢固地抓住绝缘材料。所有Klein手柄均采用定制的锻造钢制造,经过机械加工和热处理,具有耐用性。每个手柄都经过单独手动检查和启动,以确保正常工作。握把也经过严格测试并拉至额定负载,以确保质量和可靠性。
产品规格
电缆类型:
铜
电缆直径:
0.31”到0.53”(7,.87到13.46 mm)
颚类型:
缺口
下颚长度:
4.75英寸(120.7毫米)
最大安全载荷:
4500磅(2041千克)
重量:
3.4磅(1.5千克)
UPC:
092644470035
警告
- 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
- 在拉动时在通电线上/附近使用,接地,绝缘或隔离手柄。
- 不要超过额定容量。
- 始终将适当尺寸和类型的手柄与应用相匹配。
- 把手用于临时安装,而不是用于永久性锚固。