Project Description

Grip for High Strength Cables 0.37”

1613-40

  • Works with aircraft, EHS, messenger and guy strand cable
  • Designed for cable sizes from 0.12 to 0.37-Inch (3.10 to 9.40 mm)
  • Double ”V” grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
  • Sawtooth profile provides extra gripping power
  • 4500-Pound (2041 kg) Maximum Safe Load
  • For larger conductors, see our grips with round inside-jaw contour

高强度电缆夹持0.37”

1613-40

  • 适用于飞机,EHS,信使和绞线电缆
  • 适用于0.12至0.37英寸(3.10至9.40毫米)的电缆
  • 双“V”槽提供四点接触,减少滑动的可能性并提供电线和电缆的正确对齐
  • 锯齿形轮廓提供额外的抓握力
  • 4500磅(2041千克)安全载荷
  • 对于较大的导体,请参阅我们的带有圆形内颚轮廓的夹具

This Klein Tools 1613-40 Chicago Grip is designed for EHS, Messenger, and Guy Strand cable. The double V grooves provide four-point contact, which reduces chances of slipping and also provides proper alignment of wire and cable. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.

Specifications
Application:
Extra-High-Strength Cables, Messenger, Guy Strand
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.12” to 0.37” (30.05 to 9.40 mm)
Jaw Type:
Double V
Jaw Length:
4.188” (106.4 mm)
Maximum Safe Load:
4500 lb (2041 kg)
Weight:
2.7 lb (1.2 kg)
UPC:
092644470158
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.

这款Klein Tools 1613-40 Chicago Grip为EHS,Messenger和Guy Strand电缆而设计。双V形槽提供四点接触,可减少滑动的可能性,并提供电线和电缆的正确对齐。所有Klein手柄均采用定制的锻造钢制造,经过机械加工和热处理,具有耐用性。每个手柄都经过单独手动检查和启动,以确保正常工作。握把也经过严格测试并拉至额定负载,以确保质量和可靠性。

产品规格
应用:
特别高强度电缆,信使,Guy Strand
电缆类型:
飞机,EHS,信使,Guy Strand
电缆直径:
0.12英寸至0.37英寸(30.05至9.40毫米)
颚类型:
双V
下颚长度:
4.188”(106.4 mm)
安全载荷:
4500磅(2041千克)
重量:
2.7磅(1.2千克)
UPC:
092644470158
警告
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用,接地,绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装,而不是用于永久性锚固。