Chicago? Grip for Conductors 20k Lb Load

1628-30

  • Round jaws are shaped to provide maximum contact with the cable, virtually eliminating conductor damage
  • These grips are special order only, please allow 30 days for delivery, not returnable
  • Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer’s code

芝加哥导体夹具20k磅负载

1628-30

  • 圆形钳口的形状可以 接触电缆，从而消除导体损坏
  • 这些夹具只是特殊订单，请允许30天交货，不可退货
  • 订单必须指定电缆的精确外径，带钢绞线组合的圆形铣刀或制造商代码
Specifications
Cable Diameter:
1,033,500 CM ACSR 1.24”
UPC:
092644470400
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.
产品规格
电缆直径：
1,033,500 CM ACSR 1.24”
UPC：
092644470400
警告
  • 每次使用前，清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用，接地，绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装，而不是用于永久性锚固。