Chicago? Grip for Conductors 25k Lb Load

1628-40

  • Round jaws are shaped to provide maximum contact with the cable, virtually eliminating conductor damage.
  • These grips are special order only. Please allow 30 days for delivery. These are not returnable.
  • Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer’s code.

芝加哥导体夹具25k磅负载

1628-40

  • 圆形钳口的形状可以 接触电缆，从而消除导体损坏。
  • 这些把手只是特殊订单。请允许30天交货。这些都不可退货。
  • 订单必须指定电缆的精确外径，带钢绞线组合的圆形铣刀或制造商代码。
Specifications
Cable Diameter:
1,590,000 CM ACSR 1.54”
UPC:
092644470516
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.
产品规格
电缆直径：
1,590,000 CM ACSR 1.54”
UPC：
092644470516
警告
  • 每次使用前，清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用，接地，绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装，而不是用于永久性锚固。