Project Description

Chicago? Grip – Dual Conductor Trans

1628-40VR

  • Designed specifically for VR2? (vibration-resistant) and TransPowr? T-2? dual conductor twisted pair cables.
  • Machined upper and lower jaws eliminate scoring or damage to second conductor by contouring to second conductor.
  • Round jaws shaped to provide maximum contact with circumference of cable and prevent cable deformation.
  • Supplied with spring and locking loop handles, allows jaws to be held in open position for easier placement on cable.
  • Grips maintain temporary tension until the wire or cable can be permanently terminated.
  • Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer’s code.

Chicago?Grip – 双导体Trans

1628-40VR

  • 为VR2 (抗振动)和TransPowr T-2 双导线双绞线电缆而设计。
  • 机加工的上颚和下颚通过勾画到第二导体来消除对第二导体的刻痕或损坏。
  • 圆形钳口成型,以提供与电缆周长的接触,并防止电缆变形。
  • 提供弹簧和锁定环手柄,允许钳口保持在打开位置,以便更容易放置在电缆上。
  • 握把保持暂时的张力,直到电线或电缆 终止。
  • 订单必须指定电缆的精确外径,带钢绞线组合的圆形铣刀或制造商代码。
Specifications
Cable Type:
ACSR, AAC
Cable Diameter:
1192.5 MCM ACSR and AAC Diameter: 1.258” (31.95)
Jaw Type:
Round
UPC:
092644470509
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • Always match proper size and type of grip to application.
  • Do not exceed rated capacity.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Grips are to be used for temporary installation, not for permanent anchorage.
产品规格
电缆类型:
ACSR,AAC
电缆直径:
1192.5 MCM ACSR和AAC直径:1.258”(31.95)
颚类型:
UPC:
092644470509
警告
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 不要超过额定容量。
  • 在拉动时在通电线上/附近使用,接地,绝缘或隔离手柄。
  • 把手用于临时安装,而不是用于永久性锚固。