Grip for Large Diameter Conductors

1628-50

  • Removable jaw allows for installation of cable
  • Round jaws are provide maximum contact with the cable minimizing deformation
  • Removable floating jaw held in place by a bolt swaged into the lever arm of the grip, secured by a nut and cotter pin
  • These grips are special order only. Please allow 30 days for delivery. These are not returnable.
  • Jaw must be removed to insert cable
  • Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer’s code.

大直径导线夹具

1628至1650年

  • 可拆卸的钳口允许安装电缆
  • 圆形钳口提供与电缆的接触，使变形很小
  • 可拆卸的浮动钳口通过一个螺栓固定在手柄的杠杆臂上，通过螺母和开口销固定
  • 这些把手只是特殊订单。请允许30天交货。这些都不可退货。
  • 必须拆下钳口才能插入电缆
  • 订单必须指定电缆的精确外径，带钢绞线组合的圆形铣刀或制造商代码。
Specifications
Cable Type:
ACSS, ACSS-TW
Cable Diameter:
2,500,000 cm Alu. 1.82”
Jaw Length:
10.75” (273.1 mm)
UPC:
092644470660
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.
产品规格
电缆类型：
ACSS，ACSS-TW
电缆直径：
2,500,000厘米Alu。1.82 ”
下颚长度：
10.75”（273.1 mm）
UPC：
092644470660
警告
  • 每次使用前，清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用，接地，绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装，而不是用于永久性锚固。