Project Description

Interchangeable Jaw Grip Body

1628-80

  • Constructed of high strength alloy steel, hot forged, heat treated, and galvanized for toughness, strength, and corrosion resistance
  • Suitable for OPGW
  • Offers a full range of interchangeable liners to be inserted between the upper and lower jaws of the grip
  • Cable diameter range: .236” (6 mm) to .906” (23 mm)
  • Maximum working load: 6750 lbs. (3062 kg)

可互换的下颚握把体?拉缆夹

1628-80

  • 由高强度合金钢制成,热锻,热处理和镀锌,具有韧性,强度和耐腐蚀性
  • 适合OPGW
  • 提供全系列可互换的衬垫,可插入手柄的上下钳口之间
  • 电缆直径范围:.236”(6 mm)至.906”(23 mm)
  • 最大工作载荷:6750磅。(3062公斤)

Save time and effort on the job site with the Klein Tools 1628-70 Interchangeable Jaw Grip. This single grip body works with 12 interchangeable liners, so all you have to do is swap out the liners to work with a different size cable instead of reaching for an entirely new grip. This Interchangeable Jaw Grip is designed for use with optical ground wire (OPGW) conductors.

Specifications
Application:
OPGW
Cable Diameter:
0.236” to 0.906” (5.99 to 23.01 mm)
Maximum Safe Load:
6750 lb (3062 kg)
Weight:
15.0 lb (6.8 kg)
UPC:
092644472534
WARNINGS
  • Grips are to be used for temporary installation, not for permanent anchorage
  • When used on/or near energized lines, ground, insulate, or isolate grip before pulling
  • Do not exceed capacity
  • Always match proper size and type of grip to application
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage

使用Klein Tools 1628-70可互换钳口夹,在作业现场节省时间和精力。这个单一的握把与12个可互换的衬垫一起工作,所以你要做的就是更换衬垫以使用不同尺寸的电缆而不是达到全新的握把。这种可互换的钳口夹具设计用于光学地线(OPGW)导体。

产品规格
应用:
OPGW
电缆直径:
0.236”到0.906”(5.99到23.01 mm)
最大安全载荷:
6750磅(3062千克)
重量:
15.0磅(6.8千克)
UPC:
092644472534
警告
  • 把手用于临时安装,而不是用于永久性锚固
  • 在拉动时,在通电线路上/附近使用,接地,绝缘或隔离手柄
  • 不要超过容量
  • 始终将适当尺寸和类型的手柄与应用相匹配
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动