Project Description

Chicago? Grip with Latch 0.74-Inch Capacity

1656-40H

  • Hot-line grips for both bare and insulated conductors
  • Grip may be placed on wire with hot-line stick
  • When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire
  • Standard hot-line grips are not supplied with springs or lock-open features
  • When springs or lock-open features are desired, add prefix letter ”S” before catalog number (example: S1684-5H)

带有闩锁0.74英寸容量的Chicago?拉缆夹

1656-40H

  • 裸线和绝缘导线的热线夹具
  • 握把可以用热线棒放在电线上
  • 当取下斗杆时,闩锁会??自动关闭,以防止抓地意外脱离钢丝
  • 标准热线夹具不提供弹簧或锁定打开功能
  • 当需要弹簧或锁定打开功能时,在目录号之前添加前缀字母“S”(例如:S1684-5H)

Klein Tools 1656 Series Chicago Grips have a round, smooth inside jaw contour making it perfect for work with stranded copper cables. These smooth jaws grip with maximum contact and are less likely to cause cable deformation. This grip also has a hot-line latch designed for placing a grip on a cable with a hot-line stick. The three notches in the hot-line latch adjust the balance of the grip to better match the direction of the cable sag. Grips are rigorously tested and pulled to rated load to ensure the highest quality and reliability.

Specifications
Application:
Bare Conductors
Cable Type:
ACSR, AAC
Cable Diameter:
0.53” to 0.74” (13.46 to 18.80 mm)
Jaw Type:
Round
Jaw Length:
5.5” (139.7 mm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
8.5 lb (3.92 kg)
UPC:
092644471124
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.

Klein Tools 1656系列Chicago Grips具有圆形,光滑的内部钳口轮廓,非常适合与绞合铜缆一起使用。这些光滑的钳口以很大的接触方式夹紧,不太可能导致电缆变形。该手柄还有一个热线锁扣,设计用于将手柄放在带有热线棒的电缆上。热线闩锁中的三个凹口调节手柄的平衡,以更好地匹配电缆下垂的方向。握把经过严格测试并拉至额定负载,以确保质量和可靠性。

产品规格
应用:
裸导体
电缆类型:
ACSR,AAC
电缆直径:
0.53”到0.74”(13.46到18.80 mm)
颚类型:
下颚长度:
5.5英寸(139.7毫米)
最大安全载荷:
8000磅(3629千克)
重量:
8.5磅(3.92千克)
UPC:
092644471124
警告
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用,接地,绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装,而不是用于永久性锚固。