Chicago? Grip for Bare Cables 0.74 to 0.86-Inch

1656-50

  • Round, smooth inside jaw contour on this series of grips is ideal for bare ACSR, aluminum, and stranded copper cables
  • Smooth jaws grip with maximum contact and are less likely to damage conductors

Chicago Grip for?裸导线 0.74至0.86英寸

1656-50

  • 该系列夹具上的圆形,光滑的内部钳口轮廓非常适用于裸露的ACSR,铝和绞合铜缆
  • 光滑的钳口可以很大程度地接触,并且不太可能损坏导体

Klein Tools 1656 Series Chicago Grips have a round, smooth inside jaw contour making it perfect for work with stranded copper cables. These smooth jaws grip with maximum contact and are less likely to cause cable deformation. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.

Specifications
Application:
Bare ACSR, Aluminum and Stranded-Copper Cables
Cable Type:
ACSR, AAC
Cable Diameter:
0.74” to 0.86” (18.80 to 21.84 mm)
Jaw Type:
Round
Jaw Length:
5.5” (139.7 mm)
Maximum Safe Load:
8000 lb (3269 kg)
Weight:
7.5 lb (3.4 kg)
UPC:
092644471148
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.

Klein Tools 1656系列Chicago Grips具有圆形,光滑的内部钳口轮廓,非常适合与绞合铜缆一起使用。这些光滑的钳口以很大的接触方式夹紧,不太可能导致电缆变形。所有Klein手柄均采用定制的锻造钢制造,经过机械加工和热处理,具有耐用性。每个手柄都经过单独手动检查和启动,以确保正常工作。握把也经过严格测试并拉至额定负载,以确保质量和可靠性。

产品规格
应用:
裸露的ACSR,铝和绞合铜缆
电缆类型:
ACSR,AAC
电缆直径:
0.74”到0.86”(18.80到21.84 mm)
颚类型:
下颚长度:
5.5英寸(139.7毫米)
最大安全载荷:
8000磅(3269千克)
重量:
7.5磅(3.4千克)
UPC:
092644471148
警告
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用,接地,绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装,而不是用于永久性锚固。