Chicago? Grip for PVC-Covered Conductors 0.42-Inch
1659-20
- Serpentine jaws are specially machined to allow insertion of insulated conductor through the jaws, which reduces danger of slippage which might result in insulation damage
- Eliminates necessity of stripping insulation from conductor
- Round inside-jaw contour
用于PVC覆盖导体的Chicago握把0.42英寸
1659-20
- 蛇形钳口经过特殊加工，可以通过钳口插入绝缘导线，从而降低滑动的危险，从而可能导致绝缘损坏
- 消除了从导体上剥离绝缘层的必要性
- 圆形内颚轮廓
The Klein Tools 1659 Series PVC-Covered Chicago Grips have a specially machined serpentine jaw which allows an insulated conductor to be inserted through the jaws. This eliminates the need to strip insulation from the conductor first. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.
Specifications
Cable Type:
Copper
Cable Diameter:
0.20” to 0.42” (5.08 to 10.67 mm)
Jaw Type:
Round – Serpentine
Jaw Length:
4.188” (106.4 mm)
Maximum Safe Load:
4500 lb (2041 kg)
Weight:
2.6 lb (1.2 kg)
UPC:
092644471230
WARNINGS
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
Klein Tools 1659系列PVC覆盖芝加哥夹具有一个特殊加工的蛇形夹爪，允许绝缘导体通过夹爪插入。这消除了从导体剥离绝缘的需要。所有Klein手柄均采用定制的锻造钢制造，经过机械加工和热处理，具有耐用性。每个手柄都经过单独手动检查和启动，以确保正常工作。握把也经过严格测试并拉至额定负载，以确保质量和可靠性。
产品规格
电缆类型：
铜
电缆直径：
0.20英寸到0.42英寸（5.08到10.67毫米）
颚类型：
圆形 – 蛇纹石
下颚长度：
4.188”（106.4 mm）
最大安全载荷：
4500磅（2041千克）
重量：
2.6磅（1.2千克）
UPC：
0926444712??30
警告
- 每次使用前，清洁钳口区域并检查手柄是否正确操作以避免滑动。
- 在拉动时在通电线上/附近使用，接地，绝缘或隔离手柄。
- 不要超过额定容量。
- 始终将适当尺寸和类型的手柄与应用相匹配。
- 把手用于临时安装，而不是用于永久性锚固。
