Project Description

Parallel Jaw Grip, 0.75-Inch Cable Capacity

1671-10

  • Longer jaws achieve a firm hold, reducing possibility of slippage and damage to cable
  • Design includes a latch, plus a large-diameter eye that accommodates large hooks on hoists, winches and tackle blocks
  • When latch is closed, it helps maintain cable position in grip jaws

平行钳口,0.75英寸电缆容量

1671-10

  • 更长的钳口可以牢牢固定,减少滑动和损坏电缆的可能性
  • 设计包括一个闩锁,以及一个大直径的眼睛,可以容纳起重机,绞车和滑车组件上的大钩子
  • 当闩锁闭合时,它有助于保持夹爪中的电缆位置

The Klein Tools 1671-10 Parallel Jaw Grip works with a wide range of cable types and sizes. The longer jaws provide a firm hold on the cable, reducing the possibility of slippage and deformation. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.

Specifications
Application:
Wire Pulling
Special Features:
Extended Jaw
Cable Type:
Aircraft, Messenger, Guy Strand
Cable Diameter:
0.37” to 0.75” (9.40 to 19.05 mm)
Jaw Type:
Double V
Jaw Length:
4.375” (111.1 mm)
Maximum Safe Load:
10,000 lb (4536 kg)
Weight:
4.3 lb (2.0 kg)
UPC:
092644471476
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.

Klein Tools 1671-10 Parallel Jaw Grip适用于各种类型和尺寸的电缆。较长的钳口可牢牢固定电缆,减少滑动和变形的可能性。所有Klein手柄均采用定制的锻造钢制造,经过机械加工和热处理,具有耐用性。每个手柄都经过单独手动检查和启动,以确保正常工作。握把也经过严格测试并拉至额定负载,以确保质量和可靠性。

产品规格
应用:
拉线
特殊功能:
延长下颌
电缆类型:
飞机,信使,盖斯斯特兰德
电缆直径:
0.37”到0.75”(9.40到19.05 mm)
颚类型:
双V
下颚长度:
4.375”(111.1 mm)
最大安全载荷:
10,000磅(4536千克)
重量:
4.3磅(2.0千克)
UPC:
092644471476
警告
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用,接地,绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装,而不是用于永久性锚固。