Chicago Grip – Bell-System Type L Grip

1684-5AT

  • Identical to Bell-System type ”L” strand puller
  • For cable diameter range of 0.218 to 0.550-Inch (5.54 to 13.97 mm)
  • Max Safe Load of 8000 lb (3629 kg)
  • Outside diameter of support wire includes thickness of polyethylene coating
  • Equipped with chain, toggle and shackle to keep grip from falling off the cable
  • For support wire 0.134 and larger, refer to 1659 series

Chicago Grip – 贝尔系统L型握把

1684-5AT

  • 与贝尔系统型”L”拉链器相同
  • 电缆直径范围为0.218至0.550英寸(5.54至13.97毫米)
  • 最大安全载荷8000磅(3629千克)
  • 支撑线的外径包括聚乙烯涂层的厚度
  • 配有链条,肘节和卸扣,以防止抓地力从电缆上脱落
  • 对于0.134及以上的支撑线,请参阅1659系列

Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. Identical to Bell-System type -InchL-Inch strand puller. Equipped with chain, toggle and shackle. For support wire 0.134-Inch and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.

Specifications
Type:
”L” Strand Puller
Cable Type:
Steel Strand
Cable Diameter:
0.218” to 0.55” (5.54 to 13.97 mm)
Jaw Type:
Double V
Jaw Length:
5” (127.0 mm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.9 lb (3.12 kg)
UPC:
092644471636
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.

设计用于铝,铜,防风雨涂层电线,PVC覆盖导体和信使和绞线。与贝尔系统类型相同–InchL-Inch钢绞线。配备链条,拨动和卸扣。对于0.134英寸或更大的支撑线,请参阅1659系列。支撑线的外径包括聚乙烯涂层的厚度。

产品规格
类型:
”L”Strand Puller
电缆类型:
钢绞线
电缆直径:
0.218英寸至0.55英寸(5.54至13.97毫米)
颚类型:
双V
下颚长度:
5”(127.0 mm)
最大安全载荷:
8000磅(3629千克)
重量:
6.9磅(3.12千克)
UPC:
092644471636
警告
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用,接地,绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装,而不是用于永久性锚固。