Project Description

Grip for High Strength Cables 0.55-Inch

1684-5

  • Designed for cable sizes from 0.218 to 0.55-Inch (5.5 to 13.9 mm)
  • Double ”V” grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
  • Max Safe Load of 8000 lb (3629 kg)
  • For larger conductors, see our grips with round inside-jaw contour

0.55英寸高强度电缆夹具

1684-5

  • 设计用于0.218至0.55英寸(5.5至13.9 mm)的电缆
  • 双“V”槽提供四点接触,减少滑动的可能性并提供电线和电缆的正确对齐
  • 安全载荷8000磅(3629千克)
  • 对于较大的导体,请参阅我们的带有圆形内颚轮廓的夹具

Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from 0.218-Inch to 0.55-Inch (5.5 to 13.9 mm). Double -InchV-Inch grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable.

Specifications
Application:
Extra-High-Strength Cables, Messenger, Guy Strand
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218” to 0.55” (5.54 to 13.97 mm)
Jaw Type:
Double V
Jaw Length:
5” (127.0 mm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
5.8 lb (2.6 kg)
UPC:
092644471629
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.

设计用于铝,铜,防风雨涂层电线,PVC覆盖导体和信使和绞线。芝加哥式握把设计用于0.218英寸至0.55英寸(5.5至13.9毫米)的电缆尺寸。双-InchV-Inch凹槽可提供四点接触,减少滑动的可能性并提供电线和电缆的正确对齐。

产品规格
应用:
超高强度电缆,信使,Guy Strand
电缆类型:
飞机,EHS,信使,Guy Strand
电缆直径:
0.218英寸至0.55英寸(5.54至13.97毫米)
颚类型:
双V
下颚长度:
5”(127.0 mm)
最大安全载荷:
8000磅(3629千克)
重量:
5.8磅(2.6千克)
UPC:
092644471629
警告
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用,接地,绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装,而不是用于永久性锚固。