Project Description

Parallel Jaw Grip, 4-3/8-Inch Length

1686-10

  • Longer jaws achieve a firm hold, reducing possibility of slippage and damage to cable
  • Design includes a latch, plus a large-diameter eye that accommodates large hooks on hoists, winches and tackle blocks
  • When latch is closed, it helps maintain cable position in grip jaws

平行钳夹,4-3 / 8英寸长度

1686-10

  • 更长的钳口可以牢牢固定,减少滑动和损坏电缆的可能性
  • 设计包括一个闩锁,以及一个大直径的眼睛,可以容纳起重机,绞车和滑车组件上的大钩子
  • 当闩锁闭合时,它有助于保持夹爪中的电缆位置

Longer jaws achieve a firm hold, reducing possibility of slippage and damage to cable. Design includes a latch, plus a large-diameter eye that accommodates large hooks on hoists, winches and tackle blocks. When latch is closed, it helps maintain cable position in grip jaws.

Specifications
Type:
Parallel Jaw
Special Features:
Longer Jaw and Large Diameter Eye
Overall Length:
7.2” (182.9 mm)
Cable Type:
Aircraft, Messenger, Guy Strand
Cable Diameter:
0.20” to 0.40” (5.08 to 10.16 mm)
Jaw Type:
Double V
Jaw Length:
4.375” (111.1 mm)
Maximum Safe Load:
10,000 lb (4536 kg)
Weight:
4.6 lb (2.1 kg)
UPC:
092644471797
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.

更长的钳口可以牢牢固定,减少滑动和损坏电缆的可能性。设计包括一个闩锁,以及一个大直径的眼睛,可以容纳起重机,绞车和滑车组件上的大钩子。当闩锁闭合时,它有助于保持夹爪中的电缆位置。

产品规格
类型:
平行钳
特殊功能:
更长的下颌和大直径眼
总长度:
7.2英寸(182.9毫米)
电缆类型:
飞机,信使,盖斯斯特兰德
电缆直径:
0.20英寸到0.40英寸(5.08到10.16毫米)
颚类型:
双V
下颚长度:
4.375”(111.1 mm)
最大安全载荷:
10,000磅(4536千克)
重量:
4.6磅(2.1千克)
UPC:
092644471797
警告
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用,接地,绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装,而不是用于永久性锚固。