Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from 0.12-Inch to 1.0-Inch (3.10 to 25.4 mm). Equipped with chain, toggle and shackle. For support wire 0.134-Inch and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.
”L” Strand Puller
0.218” to 0.55” (5.54 to 13.97 mm)
5” (127.0 mm)
Maximum Safe Load:
8000 lb (3629 kg)
6.6 lb (2.99 kg)
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation, not for permanent anchorage.