Insulated Pliers, Slim Handle Side Cutters, 8-Inch

2138NEEINS

  • Streamlined design with sure-gripping, cross-hatched knurled jaws
  • Hot-riveted joint for smooth action
  • New England nose type
  • Weight: 1 pound

绝缘钳,薄手柄侧铣刀,8英寸

2138NEEINS

  • 流线型设计,带有可靠抓握,交叉影线的滚花钳口
  • 耐用的模制绝缘材料
  • 热铆接头,动作平稳
  • 新英格兰鼻型
  • 重量:1磅

Klein Tools Electrician’s Insulated High-Leverage Side-Cutting pliers are 1000V rated and for safety on the job. The multi-color, sleek design with small thumbguards make for easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised.

Specifications
Type:
High-Leverage Pliers
Application:
ACSR, Screws, Nails and Most Hardened Wires
Special Features:
Integral Guards Help Prevent Hand Contact With Conductive Parts
Overall Length:
8.813” (223.9 mm)
Material:
Induction Hardened Steel
Nose Type:
New England
Jaw Length:
1.438” (36.5 mm)
Jaw Width:
1.109” (28.2 mm)
Jaw Thickness:
5/8” (15.9 mm)
Knife Length:
0.75” (19.1 mm)
Cut Style:
Side-Cutting
Joint Type:
Hot-Riveted
Handle Color:
Orange/Gray
Handle Finish:
3-Layer
Insulated:
Yes
Weight:
1.0 lb (0.5 kg)
UPC:
092644701924
WARNINGS
  • Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
  • Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with an energized source.
  • Always inspect your tools before use.
  • Always wear approved eye protection.
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
  • Keep tool clean, dry and free of any surface contaminants.
  • Destroy tool if the insulation is damaged in any way.

Klein Tools电工的绝缘高杠杆侧切钳具有1000V额定值,可确保工作安全。多色,时尚的设计和小拇指,便于操作和存放。带有白色底层的三部分绝缘层提供了绝缘可能受损的警告信号。

产品规格
类型:
高杠杆钳
应用:
ACSR,螺钉,钉子和大多数硬化线
特殊功能:
整体防护装置有助于防止手接触导电部件
总长度:
8.813”(223.9 mm)
材料:
感应淬火钢
鼻型:
新英格兰
下颚长度:
1.438英寸(36.5毫米)
下颚宽度:
1.109”(28.2 mm)
下颚厚度:
5/8”(15.9 mm)
刀长:
0.75英寸(19.1毫米)
剪裁风格:
侧切
关节类型:
热铆接
处理颜色:
橙/灰
处理完成:
3层
绝缘:
重量:
1.0磅(0.5千克)
UPC:
092644701924
警告
  • 只要有可能,在工作或周围工作之前,始终要断开线路和设备的电源。Klein绝缘工具的设计只是为了减少工具可能接触带电源的伤害几率。
  • 如果工具有可能与带电源接触,则仅使用标有国际1000伏额定等级符号的工具。
  • 使用前请务必检查工具。
  • 始终佩戴认可的护目镜。
  • 当可能接触带电源时,请勿触摸工具的未绝缘部分或任何导电物体。
  • 保持工具清洁,干燥,无任何表面污染物。
  • 如果绝缘材料受到任何损坏,请销毁工具。