Conduit Locknut Wrench, Fits 1/2”, 3/4”

56999

  • Easily attach locknuts in tight or deep cut-in boxes
  • For 1/2-Inch and 3/4-Inch connectors
  • Direct-drive heads rotate each other when twisted
  • Heavy duty steel construction enables needed torque to loosen or tighten connectors
  • Perfect for remodel work where box is filled with existing wires

导管锁紧扳手,适合1/2”,3/4”

56999

  • 在紧密或深切的盒子中轻松安装锁紧螺母
  • 适用于1/2英寸和3/4英寸连接器
  • 扭曲时,直接驱动头相互旋转
  • 重型钢结构可以使所需的扭矩松动或拧紧连接器
  • 适用于装有现有电线的盒子的改造工作

Perfect for hard to reach connectors. Works in deep or tight boxes where pliers or fingers can’t. Drive shaft design lets you easily loosen and tighten conduit connectors using a stationary twisting motion. Turn a complicated operation into an easy two hand task with Klein’s conduit locknut wrench.

Specifications
Type:
Twist Rotating Head
Application:
For Reaching 1/2” (12.7 mm) and 3/4” (19.1 mm) Connectors in Deep or Tight Boxes
Special Features:
Screwdriver Leverage Hole in Head to Provide Extra Torque
Material:
Steel
Size:
1/2” and 3/4”
Overall Length:
9” (228.6 mm)
Weight:
0.70 lb (0.32 kg)
UPC:
092644569999
WARNINGS
  • Always ensure that you and the persons in the vicinity wear approved eye protection.
  • Do not use on or near live electrical circuits.

适合难以触及的连接器。在钳子或手指不能的深或紧的盒子里工作。驱动轴设计使您可以使用固定的扭转动作轻松松开和拧紧导管连接器。使用Klein的导管锁紧扳手将复杂的操作变成简单的双手任务。

产品规格
类型:
扭转头
应用:
用于在深箱或紧箱中达到1/2”(12.7 mm)和3/4”(19.1 mm)连接器
特殊功能:
螺丝刀利用头部孔来提供额外的扭矩
材料:
尺寸:
1/2”和3/4”
总长度:
9”(228.6 mm)
重量:
0.70磅(0.32千克)
UPC:
092644569999
警告
  • 始终确保您和附近的人员佩戴认可的护目镜。
  • 请勿在带电电路上或附近使用。