带插座测试仪的双量程非接触电压测试仪
NCVT2PKIT
- 套件包含非接触电压测试仪和插座测试仪
- 双量程NCVT-2P自动检测并指示低压范围和标准电压(48-1000V AC)
- NCVT-2P可对电缆,电线,断路器,照明器材,开关,插座和电线中的标准电压进行非接触式检测
- NCVT-2P是一款轻巧,紧凑的工具,带有口袋夹,便于存储和快速访问
- CAT IV 1000伏额定值提供了扩展的操作和保护
- 带O型圈的螺纹电池盖可确保NCVT-2P免受灰尘和水的侵入
- 插座测试仪旨在检测标准插座中常见的接线问题
- 插座测试仪指示的条件:接线正确,接地,反极性,热线断开,中性线断开,热/地线反向
Dual Range Non-Contact Voltage Tester with Receptacle Tester
NCVT2PKIT
- Kit contains a non-contact voltage tester and receptacle tester
- Dual range NCVT-2P automatically detects and indicates low voltage range and standard voltage (48-1000V AC)
- NCVT-2P provides non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
- NCVT-2P is a lightweight, compact tool with pocket clip for convenient storage and quick access
- CAT IV 1000 Volt rating provides expanded operation and protection
- Screw-thread battery cap with O-ring ensures protection against dust and water ingress for the NCVT-2P
- Receptacle Tester is designed to detect the most common wiring problems in standard receptacles
- Conditions the Receptacle Tester indicates: wiring correct, open ground, reverse polarity, open hot, open neutral, hot/ground reversed
Klein Tools的NCVT2PKIT包括双量程非接触电压测试仪和插座测试仪。NCVT-2P是一种非接触式电压测试仪,可检测12至1000V AC,并指示电缆,电线,断路器,灯具,开关,插座和电线中是否存在电压,以及门铃,温控器中的交流电压是否低。电压照明和灌溉系统。包括视觉和听觉信号。插座测试仪将对标准的120V AC接地插座进行故障排除。
技术指标
类型:
NCVT-2P的双量程
应用:
检测并指示低电压和标准电压;检测标准插座中常见的接线问题
特殊功能:
NCVT-2P上的两种模式:70至1000V AC和12至1000V AC
材料:
聚碳酸酯纤维
跌落保护:
NCVT2P:6.6’(2 m);?RT105:3.3’(1 m)
电压:
12-1000V AC
频率:
50-500赫兹
污染度:
NCVT-2P:2
防护等级:
NCVT-2P:IP54
标准:
NCVT-2P:CAT IV 1000V;RT105:CAT II 125V
包括:
带2节AAA电池的非接触电压测试仪和插座测试仪
电池:
2个AAA
电池寿命:
142小时
总长度:
5.8英寸(14.8厘米)
总高度:
1.1英寸(2.8厘米)
总宽度:
0.9英寸(2.2厘米)
重量:
1.7盎司(48克)
UPC:
092644693274
警告事项
- 在操作或维修该测试仪之前,请阅读,理解并遵循手册中的所有警告,注意事项,安全信息和说明。不遵守指示可能导致死亡或重伤。
- 切勿假定零线或地线已断电。断开时,多线分支电路中的中性点可能会通电,在处理之前必须重新测试。
The NCVT2PKIT from Klein Tools includes a dual-range, non-contact voltage tester as well as a receptacle tester. The NCVT-2P is a non-contact voltage tester that detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The receptacle tester will troubleshoot standard 120V AC grounded outlets.
Specifications
Type:
Dual Range for NCVT-2P
Application:
Detects and Indicates Low Voltage and Standard Voltage; Detects Most Common Wiring Problems in Standard Receptacles
Special Features:
Two Distinctive Modes on NCVT-2P: 70 to 1000V AC and 12 to 1000V AC
Material:
Polycarbonate
Drop Protection:
NCVT2P: 6.6′ (2 m); RT105: 3.3′ (1 m)
Voltage:
12 – 1000V AC
Frequency:
50 – 500 Hz
Pollution Degree:
NCVT-2P: 2
Ingress Protection:
NCVT-2P: IP54
Standard:
NCVT-2P: CAT IV 1000V; RT105: CAT II 125V
Included:
Non-Contact Voltage Tester with 2 x AAA Batteries and Receptacle Tester
Batteries:
2 x AAA
Battery Life:
142 Hrs
Overall Length:
5.8” (14.8 cm)
Overall Height:
1.1” (2.8 cm)
Overall Width:
0.9” (2.2cm)
Weight:
1.7 oz (48 g)
UPC:
092644693274
WARNINGS
- Read, understand, and follow all warnings, cautions, safety information, and instructions in the manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
- Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling.