Project Description

Insulated Screwdriver, #1 Square Tip, 4-Inch Shank

661-4-INS

  • 1000V Rated for safety
  • Cushion-Grip handle for greater torque and comfort
  • Custom US-made steel tool
  • Made in the USA
  • This item replaces the 665-INS

绝缘螺丝刀,#1方形尖头,4英寸柄

661-4-INS

  • 1000V额定安全性
  • 耐用的双层模塑绝缘材料
  • Cushion-Grip手柄可提供更大的扭矩和舒适度
  • 定制美制钢制工具
  • 美国制造
  • 此项目取代了665-INS

Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. Two layers of insulation provide protection against electric shock. Clearly marked with the official 1000-volt rating symbol. Round shank with square-recess tip.

Specifications
Application:
For Work Near Energized Sources
Special Features:
Flame Retardant and Impact Resistant Handle
Tip Type:
#1 Square
Shank Type:
Round
Shank Length:
4” (101.6 mm)
Material:
Induction Hardened Steel
Insulated:
Yes
Handle Material:
High-Dielectric Plastic
Handle Color:
Black
Overall Length:
8.313” (211.2 mm)
Type:
Recessed
Weight:
3.2 oz (91 g)
UPC:
092644853364
WARNINGS
  • Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
  • Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
  • Wear approved eye protection.
  • Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
  • Do NOT use to pry or chisel.
  • Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.

Klein绝缘工具结合了很好的功能,同时降低了受伤风险,工具可能与电压高达1000伏的通电源接触。两层绝缘层可提供电击保护。清楚地标有官方的1000伏额定值符号。带有方形凹槽尖端的圆柄。

产品规格
应用:
对于能量来源附近的工作
特殊功能:
阻燃和抗冲击手柄
提示类型:
#1广场
柄类型:
回合
柄长:
4”(101.6 mm)
材料:
感应淬火钢
绝缘:
手柄材质:
高介电塑料
处理颜色:
黑色
总长度:
8.313”(211.2 mm)
类型:
嵌入式
重量:
3.2盎司(91克)
UPC:
092644853364
警告
  • 如果工具有可能与带电源接触,则仅使用标有上述官方国际1000伏额定值符号的工具。
  • 只要有可能,在工作或周围工作之前,始终要断开线路和设备的电源。Klein绝缘工具的设计只是为了减少工具可能接触带电源的伤害几率。
  • 当可能接触带电源时,请勿触摸工具的未绝缘部分或任何导电物体。
  • 佩戴认可的眼睛保护。
  • 由于水分,薄膜或其他表面污染物具有导电性,因此Klein绝缘工具必须保持清洁,干燥且无任何表面污染物。
  • 不要用来撬或凿。
  • 使用前请务必检查工具。如果绝缘材料以任何方式损坏,则销毁工具。