8-Inch Insulated Pliers, Diagonal Cutters

D228-8-INS

  • For insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • High-leverage design. Rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs
  • Integral guards help prevent hand contact with conductive parts
  • Made of forged steel for maximum durability

8英寸绝缘钳,对角切割机

D228-8-INS

  • 用于绝缘工具,并清楚标明官方的1000伏额定值符号
  • 两层绝缘层可提供电击保护
  • 厚厚的,坚韧的高介电白色内涂层粘合在工具上
  • 阻燃,抗冲击,亮橙色外涂层
  • 高杠杆设计。铆钉更接近切削刃,提高了切削功率
  • 整体防护装置有助于防止手与导电部件接触
  • 由锻钢制成,具有很大的耐用性

These High-Leverage InsulatedDiagonal-Cutting pliers are 1000V rated for safety on the job. Thethick, exceptionally tough white inner layercoating is bonded to the tool. Integralthumb guards prevent hand contact with conductive parts. The bright orange handles make this tool comfortable to use all day and easy to identify in the field. The durable, molded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools. Cutting knives are induction hardened for long life.

Specifications
Type:
High-Leverage Pliers
Application:
ACSR, Screws, Nails and Most Hardened Wire
Special Features:
Flame Retardant and Impact Resistant Handle
Overall Length:
8.25” (209.6 mm)
Material:
Induction Hardened Steel
Nose Type:
Tapered
Jaw Length:
0.813” (20.7 mm)
Jaw Width:
1.188” (30.2 mm)
Jaw Thickness:
13/16” (20.6 mm)
Cutting Knives:
Standard
Cut Style:
Diagonal-Cutting
Joint Type:
Hot-Riveted
Handle Color:
Orange
Handle Finish:
2-Layer
Handle Length:
6” (152.4 mm)
Insulated:
Yes
Weight:
0.70 lb (0.32 kg)
UPC:
092644720420
WARNINGS
  • Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
  • Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
  • Wear approved eye protection.
  • Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
  • Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.

这些高杠杆绝缘对角切割钳的额定电压为1000V,可确保工作安全。厚厚的白色内层涂层与工具粘合在一起。整体式防护装置可防止手与导电部件接触。明亮的橙色手柄使这款工具整天使用舒适,便于现场识别。耐用的模制绝缘材料。切割刀经过感应淬火,使用寿命长。

产品规格
类型:
高杠杆钳
应用:
ACSR,螺钉,钉子和大多数硬化线
特殊功能:
阻燃和抗冲击手柄
总长度:
8.25”(209.6 mm)
材料:
感应淬火钢
鼻型:
圆锥
下颚长度:
0.813”(20.7 mm)
下颚宽度:
1.188”(30.2 mm)
下颚厚度:
13/16”(20.6 mm)
切刀:
标准
剪裁风格:
对角线切割
关节类型:
热铆接
处理颜色:
橙子
处理完成:
2层
手柄长度:
6”(152.4 mm)
绝缘:
重量:
0.70磅(0.32千克)
UPC:
092644720420
警告
  • 如果工具有可能与带电源接触,则仅使用标有上述官方国际1000伏额定值符号的工具。
  • 只要有可能,在工作或周围工作之前,始终要断开线路和设备的电源。Klein绝缘工具的设计只是为了减少工具可能接触带电源的伤害几率。
  • 当可能接触带电源时,请勿触摸工具的未绝缘部分或任何导电物体。
  • 佩戴认可的眼睛保护。
  • 使用前请务必检查工具。如果绝缘材料以任何方式损坏,则销毁工具。
  • 由于水分,薄膜或其他表面污染物具有导电性,因此Klein绝缘工具必须保持清洁,干燥且无任何表面污染物。