D2RB-EC绝缘套袖20kV,浸胶,黑色,曲臂式

linemen’S SleeveS

ruBBer insulating sleeves extend coverage of the arm
from the cuff of rubber insulating gloves to the shoulder; fully protecting
these areas from accidental contact with energized conductors and
equipment. Salisbury sleeves feature a reinforcing fold at the cuff.
This fold is preferred over a rolled bead because it adds less bulk to
the cuff and fits into the glove easier without pushing. Two different
processes are used to manufacture insulating sleeves; dipping and
molding.

sizing
Sleeves should be selected to fit the arm comfortably, covering from
the top of the shoulder to inside the top of the glove. To minimize the
possibility of the sleeves pushing gloves off the hand, size the sleeve
to the shortest length possible while maintaining complete coverage
to the shoulder.

SIzInG lInEmEn’S SlEEVES
sTRAIGHT ARM sleeve- Figure 1
A B c d
in. (m) in. (mm) in. (mm) in. (mm)
SMALL
24.25 (616) 15.13 (384) 12.5 (317) 5.75 (146)
REGULAR
26.25 (667) 15.5 (394) 11.25 (286) 5.5 (140)
LARGE
28.5 (724) 17 (432) 12.87 (327) 6.87 (175)
ExTRA LARGE
30 (762) 19 (483) 13.25 (337) 6.87 (175)
eXTRA CURveD ARM sleeve- Figure 2
A B c d
in. (mm) in. (mm) in. (mm) in. (mm)
SMALL
24.25 (616) 15.13 (384) 12.5 (317) 5.75 (146)
REGULAR
26.5 (673) 15.5 (394) 12.25 (311) 5.25 (133)
LARGE
27.75 (705) 16 (406) 12.87 (327) 6.87 (175)
ExTRA LARGE
29.5 (749) 17.5 (445) 12.87 (327) 7 (178)

DiPPeD linemen’S SleeveS
SaliSbury aDvantaGe
dipped sleeves are manufactured in the same way as Salisbury
rubber insulating gloves. Porcelain forms are dipped into liquefied rubber,
dried, trimmed, marked and cured. Every sleeve receives the same quality
inspections and electrical testing before shipping. Dipped sleeves are available
in the same colors as dipped gloves, including two color combinations.

Salisbury offers two popular styles of dipped linemen’s sleeves: straight and
extra-curved. Both styles are available in solid color or color combination,
size and voltage class. Most importantly, all are made to the same rigid
levels of quality demanded by Salisbury.

Only Salisbury offers both dipped and molded sleeves.

molded sleeves are manufactured by either injection or
compression molding methods. The advantage these methods offer is
the ability to produce sleeves of Type I or SALCOR Type II synthetic
rubber. SALCOR sleeves provide the same high quality and electrical
protection as natural rubber, with the added benefit of being resistant
to ozone and ultraviolet radiation. Type I sleeves are available in black,
yellow or maroon. Type II SALCOR sleeves are black or orange. Molded
sleeves are available in curved arm style only.
CAT. NO. BREAKDOWN FOR DIPPED TYPE I SLEEVES
VoltAGE clASS SIzE color
D0 S, R, L or xL Y = yellow
D1 S, R, L or xL B = black
D2 S, R, L or xL YB = Y inside, B out
D3 S, R, L or xL RB = R inside, B out
D4 S, R, L or xL YR = Y inside, R out
S=small, R=regular, L=large or xL=extra large
Add suffix “-ST” to order straight cuff or “-EC” to order extra-curved cuff
ExAmplE: D2LYB-ST is a Large Yellow inside, Black outside Straight Cuff
Dipped sleeve
CAT. NO. BREAKDOWN FOR MOLDED TYPE I SLEEVES
VoltAGE clASS SIzE color
1 R or L Y
2 R, L or xL B, Y, M
3 R or L Y, M
4 R or L M
R=regular, L=large or xL=extra large
B=black, Y=yellow or M=maroon
ExAmplE: 2RB is a Class 2, Regular, Black Molded Sleeve
CAT. NO. BREAKDOWN FOR MOLDED TYPE II SLEEVES
VoltAGE clASS SIzE color
1 R or L BS or OS
2 R, L or xL BS or OS
R=regular, L=large or xL=extra large
BS=black SALCOR OS=orange SALCOR
ExAmplE: 2LOS is a Class 2, Large, Orange Molded Sleeve.