Project Description

Salisbury线路工手套
它为拥有 防护性能和长时间的使用寿命而制造。橡胶绝缘手套是电工人身防护 重要的物品。它集较高的非传导性和物理特性、灵活性和耐磨性于一体。
Salisbury橡胶绝缘手套的制造是通过将陶瓷模具放入液化橡胶罐进行浸胶,然后将这层薄薄的橡胶烘干，并且反复进行这一过程直至达到所需的厚度。根据手套的不同电压等级，这种浸渍-烘干-再浸渍的循环可能需要重复30次。达到需要的厚度之后，手套会被烘干。烘干后手套会被切割至所需长度，并进行加强滚边。
手套在高压蒸汽灭菌器中进行加工处理。加工后进行首次外观检查。此过程中有瑕疵的手套被剔除，没有瑕疵的手套经过卤化处理来提高其舒适性和耐磨性。然后对其进行电压测试，测试后进行最后的外观检查。然后再准备装箱和发运。

SALISBURY线路工人绝缘手套
Salisbury的电工绝缘手套尺码 全，有从7码到12码各种尺 码供您选购，包括半码。恰到好处的贴合是很重要的。要 确定手套的尺寸，请量一下手掌的周长。要留有额外的空 间，以防手套的纤维衬里磨破，尤其是带有隔热衬里的手套。

SALISBURY优点
0和00级绝缘手套长度有11”(279mm)到14”(356mm)可供选 择。00级电力绝缘橡胶手套使用红色或黑色I型橡胶。蓝色II型SALCOR橡胶制成。或者由对比性的蓝色/橙色II型SALCOR橡胶制成。外面橙色，里面蓝色的对比性设计，使您在拉伸或膨胀检查时容易发现撕裂或老化现象。
0级电力绝缘橡胶手套有红色，黑色，黄色和对比性的黑色/黄色可供选择，使用I型 橡胶制成。外面黄色，里面黑色的对比性设计，使您在拉伸或膨胀检查时容易发觉撕裂或老化现象。本款绝缘手套同样有蓝色或对比性的蓝色/橙色可供选择，使用 II型SALCOR 橡胶制成。

00级绝缘手套型号
等级 长度 颜色 尺码
E 00 11 R 7, 8, 9,10
E 00 14 R E011R/9
R=红色， I型 橡胶
例如：E0011R/8
0级绝缘手套型号
等级 长度 颜色 尺码
E 0 11 R 7, 8, 9,10
R=红色，I型 橡胶
例如: E014R/9

SALISBURY 电工绝缘手套
高压
1到4级绝缘手套有工业标准颜色黑色或对比性的两种组合颜色可供选择。内外两种颜色的对比，外层（黑色）较薄，此种设计使您在进行拉伸或膨胀检查时很 容易发觉由于撕裂或老化所呈现的内层颜色。1到4级绝缘手套有356mm、406mm、457mm三种长度可供选择。直口形为标准的356mm、406mm和457mm绝缘手套。直口袖是默认样式。
斜袖口 斜口型的袖口倾斜，在胳膊弯曲时能够防止肘部的手套堆聚和卷边。此款绝缘手套只有457mm可供选择。
钟型和喇叭型袖口，适合厚重的冬季服装，在热天气时也有较好的通风。这些手套都有1到4级可选。钟型和喇叭型袖口绝缘手套没有7、8码。
钟形袖口 E214BCRB/10

喇叭形袖口 E214FCYB/10
1，2，3，4级的绝缘手套型号
等级 手套长度 袖口样式 颜色 尺码 (mm)
E 1 14，16或18 FC, BC, C B, YB 或 RB
E 2 14，16或18 FC, BC, C B, YB 或 RB 8, 9, 10, 11, 12
E 3* 14，16或18 FC, BC, C B, YB 或 RB
E 4** 14，16或18 FC, BC, C B, YB 或 RB
FC=喇叭形袖口 BC=钟形袖口 C=斜袖口
*可供选择绝缘手套尺码有8-12码
**可供选择的绝缘手套尺码有9-12码
B=黑色
YB=里面黄色，外面黑色
RB=里面红色，外面黑色
I型 橡胶
例如: E116FCYB/10
***喇叭形袖口的绝缘手套有9-12码可供选择
***钟形袖口的绝缘手套有9-12码可供选择

SaliSbury rubber inSulatinG GloveS & mittenS
HigH Voltage – aStM ClaSS 1, 2, 3, 4 & low Voltage – aStM ClaSS 00, 0

Class 1 through 4 gloves are available in black or in
contrasting two-color combinations. The contrast between the thin outer
color against the inner color makes inspecting for cuts and tears easier when
the glove is inflated or stretched.

Class 1 through 4 gloves are available in straight Cuff, Contour
Cuff and Bell Cuff in 14,” (356 mm), 16” (406 mm) and 18”
(457 mm) lengths. Sizes 7-12 including half sizes and in Black, Red/Black
and Yellow/black color combinations.

salisBury linemen’s mittens are made from the same
durable lightweight rubber as the five finger gloves, yet designed to keep
the user warmer during harsh temperatures. Mittens are offered in a Bell
Cuff style in Class 2 and 3, sizes 9, 10, 11 and in Red/Black and Yellow/
Black color combinations.

seleCting the right size, length and style
Salisbury linemen’s gloves are available in a full range of sizes, from 7
through 12, including half sizes on 8, 9, and 10. Proper fit is important.
To determine glove size, measure the circumference around the palm.
Allow for additional room if fabric glove liners are to be worn, especially
with thermal liners.

salisBury low voltage Class 00 and 0 gloves
are available in 11 and 14 inch lengths.

Class 00 Electrical Insulating Rubber Gloves are made from red,
black or yellow Type I natural rubber and in blue Type II SALCOR, or
in contrasting blue/orange Type II SALCOR. The contrast between the
outer orange color against the inner blue color makes inspecting for cuts
and tears easier when the glove is inflated or stretched.

Class 0 Electrical Insulating Rubber Gloves are available in red, black
or yellow, and contrasting black/yellow colors in Type I Natural Rubber.
The contrast between the outer yellow color against the inner black color
makes inspecting for cuts and tears easier when the glove is inflated or
stretched. These gloves are also available in blue or contrasting blue/
orange colors Type II SALCOR rubber.

rubber inSulatinG GloveS StanDarD oFFerinG*
hIGh VoltAGE GloVES
CLASS GLOVE CUFF STYLE LENGTH in. (mm) COLOR SIzE
E1 Straight Cuff 14 (356) , 16 (406) B, RB, YB 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E2 Straight Cuff 14 (356) , 16 (406) B, RB, YB 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E2 Straight Cuff 18 (457) B 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E3 Straight Cuff 14 (356) RB 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E3 Straight Cuff 16 (406), 18 (457) B, RB, YB 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E4 Straight Cuff 16( 406), 18 (457) B, RB, YB 9, 9H, 10, 10H, 11, 12
CLASS GLOVE CUFF STYLE LENGTH in. (mm) COLOR SIzE
E1 BELL CUFF 14 (356) RB 8, 8H, 9, 9H, 10, 10H, 11, 12
E2 BELL CUFF 14 (356) , 16 (406), 18 (457) RB, YB 8, 8H, 9, 9H, 10, 10H, 11, 12
E2 BELL CUFF 16 (406) B, YB 8, 8H, 9, 9H, 10, 10H, 11, 12
E3 BELL CUFF 16 (406), 18 (457) RB, YB 8, 8H, 9, 9H, 10, 10H, 11, 12
E4 BELL CUFF 16 (406), 18 (457) YB 9, 9H, 10, 10H, 11, 12
CLASS GLOVE CUFF STYLE LENGTH in. (mm) COLOR SIzE
E1 CONTOUR 18 (457) RB 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E2 CONTOUR 18 (457) RB, YB 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E3 CONTOUR 18 (457) RB, YB 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E4 CONTOUR 18 (457) RB 9, 9H, 10, 10H, 11, 12
HIGH VOLTAGE MITTEN STYLE
CLASS GLOVE CUFF STYLE LENGTH in. (mm) COLOR SIzE
E2 BELL CUFF 14 (356) , 16 (406) RB, YB 9, 10, 11
E3 BELL CUFF 16 (406) YB 9, 10, 11

loW VoltAGE GloVES – StAndArd offErInG*
CLASS GLOVE CUFF STYLE LENGTH in. (mm) COLOR SIzE
E00 STRAIGHT 11 (279) B, R, Y, RY, BL, BLO 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E00 STRAIGHT 14 (356) B, R, BL, BLO 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E0 STRAIGHT 11 (279) B, R, Y, BY, BL, BLO 7, 8, 8H, 9, 9H, 10, 10H, 11, 12
E0 STRAIGHT 14 (356) B, R, Y, RY, BY, BL, BLO 7, 8, 8H, 9, 9H, 10, 10H, 11, 12

* Minimum order quantities may apply to certain standard glove options.
Please contact Salisbury Customer Service for a complete minimum order quantity glove part list.