进行正确的检查
绝缘设备应该在每天使用前都要 检查，并立刻跟进任何已经导致破坏的可疑事故。绝缘手套使用前必须充气检查。Salisbury 的带有G100A适配器的G100和G99（不带有任何适配器）是您对绝缘手套进行充气检查的不错选择。
G99是一款简单易用的便携式手套充气泵。G99提供了一个在工作现场对绝缘手套进行检查的 方法。检查时将绝缘手套用尼龙带固定在其上，然后扣上自粘搭扣条将其扎紧。把充气泵抵在 表面上，向波纹管中泵入空气，即可对手套进行充气。注意:I型绝缘手套膨胀不能超过正常尺寸的1.5倍，而II型SALCOR绝缘手套不超过1.25倍。

G100同样是一款简单易用的便携式手套充气泵。其操作与G99相似，不过带有附加的G100A适配器，能够检查00和0级和小尺码绝缘手套。检查时将绝缘手套用尼龙带固定在其上，然后扣上自粘搭扣条将其扎紧。然后将连接手套的适配器安装在充气泵的顶部，以进行充气检查。
如果在检测试验室或服务中心进行检查，G1和G2手套充气泵将是您更好的选择。两者都可以气动操作，可以在很短的时间内检查大量的手套。G1采用支架式安装，无需另接压缩气源。G1充气泵可以更高的效率检查大量的手套。
G2台座式充气泵是检查少量手套的 选择。此充气膨胀检查器既可以气动操作也可以用一个内置手动泵进行操作。

型号 说明 重量（kgs）
G99 手套充气泵套件 0.91
G99B 备用包 —
G99S 备用扎带 —
G1 支架式，带有脚控装置 20.4
G2 台座型，带有手动阀 18.1
G100 手套充气泵套件，带适配器 —
G100A 低压手套适配器 —

makinG a ProPer inSPection

OSHA 1910.137 states “Insulating equipment shall be inspected before each
day’s use and immediately following any incident that can reasonably be
suspected of having caused damage. Insulating gloves shall be given an air
test, along with the inspection.” Salisbury’s g100 with g100a adapter
for Class 00 and 0 and smaller size gloves, and the g99, without
additional adapter, are the perfect answer for inflating your gloves for inspection.

The g99 is a simple, easy to use, portable glove inflator. The G99 provides
a quality means of inspecting gloves in the field. The glove is secured to the
inflator using a nylon strap and fastened with a hook and pile closure. Inflation
is accomplished by pumping the bellows of the inflator against any surface.
note: gloves should be expanded no more than 1.5 times their normal size
for Type I, and 1.25 times normal for Type II SALCOR.

SALISBURY ADVANTAGE
The G100 is also a simple and easy to use, portable glove inflator. The G100
operates exactly like the G99, but includes an additional G100A adapter to
also inspect Class 00 and 0 and smaller gloves. To use the adapter, the glove
is secured to the G100a adapter using a nylon strap with a hook and pile
closure. The adapter, with glove attached, is then placed on top of the inflator
to be inflated for inspection.

inf series glove inflators & sleeve expanders
Proper safety requires frequent inspection of gloves and sleeves. These glove
inflators and sleeve expanders provide an efficient way to conduct complete
and thorough visual inspections before and after use in the field. They are
easy to install, simply to operate, accommodates all sleeve and glove sizes
and takes up minimal floor space. Compressed air source required.

cAt. no. dEScrIptIon
G99 Glove Inflator Kit
G99B Replacement Bag
G99S Replacement Strap
G99V Replacement Check Valve
G100 Glove Inflator Kit with Adapter
G100A Low Voltage Glove Adapter
INF-1LV Standard Bench Glove Inflator (Low Voltage Gloves)
INF-1HV Standard Bench Glove Inflator (High Voltage Gloves)
INF-2LV Standard Bench Model Glove Inflator with Air Line Connection (Low Voltage Gloves)
INF-2HV Standard Bench Model Glove Inflator with Air Line Connection (High Voltage Gloves)
INF-3LV Standard Floor Model Glove Inflator with Air Line Connection and Adjustable Stand (Low Voltage Gloves)
INF-3HV Standard Floor Model Glove Inflator with Air Line Connection and Adjustable Stand (High Voltage Gloves)
INF-5 Bench Model Air-Bag Inflator for High and Low Voltage Gloves
INF-6 Standard Sleeve Expander
INF-7 Replacement Glove Inflator Boots for Air Bag Glove Inflators
INF-8 Replacement Bladders for Sleeve Expander (with closed ends) – Set of three
INF-9 Single Replacement Bladders for Sleeve Expander (with closed ends) – Outside Bladder only