具有现场可更换电池的?电场探头?HI-6023电场探头
ETS-Lindgren的HI-6023具有现场可更换电池的电场探头具有10 kHz至1 GHz的频率响应。
ETS-Lindgren的HI-6023型射频场探头是一款全智能传感器,能够以性能规格实现快速,准确的EMF测量。光学耦合到各种读数选项使该探头非常适合各种现场监测应用。
HI-6023设计为单量程读数,可在整个动态范围内连续读取数据。每个轴(X,Y和Z)的数据值可以单独读取或求和。
HI-6023的一个功能是可现场更换的电池。该电池允许用户在必要时更换电池,无需额外校准。HI-6023的简单现场同步是正确进行电池电量监控所需的全部内容。
HI-6100通过IEEE-488和RS-232串行数据接口提供手动功能和编程控制。最多可同时显示四个现场探头的读数。
除了作为系统级平台的功能外,EMCenter 模块化射频平台和EMSense 接口卡还可与HI-6000系列现场探头一起用作现场监控器。
对于直接连接到PC,可以使用HI-4413P Serial或HI-4413USB接口。
ELECTRIC FIELD PROBES HI-6023 Electric Field Probe with Field-Replaceable Battery
?ETS-Lindgren’s HI-6023 Electric Field Probe with Field-Replaceable Battery has a?Frequency Response of 10 kHz to 1 GHz.
ETS-Lindgren’s Model HI-6023 RF?Field Probe is a fully intelligent sensor enabling fast and accurate EMF measurements with industry-leading performance specifications. Optical coupling to a variety of readout options makes this probe ideally suited for a wide range of field monitoring applications.
Designed to be single range reading, the HI-6023 can read data continuously over the entire dynamic range. Data values for each axis (X, Y, and Z) can be read individually or summed.
A unique feature of the HI-6023 is the field-replaceable battery. This battery allows the user to replace the battery when necessary, without requiring additional calibration. Simple in-field synchronization of the HI-6023 is all that is required for proper battery level monitoring.
The HI-6100 provides manual functions and programmed control via IEEE-488 and RS-232 Serial Data Interfaces. Readings from up to four field probes can be displayed simultaneously.
The EMCenter? Modular RF Platform along with the EMSense? interface card can be used with the HI-6000 series field probes as a field monitor in addition to its capability as a system level platform.???
For direct connection to a PC, either the HI-4413P Serial or the HI-4413USB interfaces are available.
主要特点
- 频率响应:10 kHz至1 GHz?
- 动态范围:2.0至800 V / m?
- 提供单个和总和轴值
- A2LA认可的校准报告?
- 适用于MIL标准规格:
- MIL-STD 461F辐射敏感性(RS)?
- 适用于汽车规格1:
- ?SAE J1113 / 27
- GMW 3091/3097/3103
- 适合商业规格:
- EN / IEC61000-4-3辐射抗扰度
- 使用大多数第三方免疫软件运行
1对于高场和高频要求,建议使用HI-6053
产品规格
电气规格
检测:?各向同性(X,Y和Z轴读数)
频率范围:??10 kHz至1 GHz
频率响应:- 10 kHz至30 kHz +0.5,-2.5 dB
- 30 kHz至1 GHz±1.0 dB
校正频率响应:??10 kHz至1.0 GHz±0.9 dB
动态范围:??2至800 V / m(单范围)
分辨率:??0.01 V / m
各向同性偏差:??±0.5 dB @ 400 MHz
线性度:??±0.5 dB(2-800) V / m)
采样率(典型值):??70个样本/秒最大
过载能力:??> 1500 V / m CW物理规格
物理接口:?双工光纤(200微米多模);?FSMA连接器。1米光缆
电池:??4.8 V NiMH,最长工作8小时电池充电器:??100-240 VAC通用输入;?完全耗尽的3小时充电
立方体外壳高度:??32毫米(1.26英寸)传感器保护帽高度:??32毫米(1.25英寸)重量:??80克(2.82盎司)安装:??1/4“20 – UNC内螺纹其他规格
- HI-6023探头
- A2LA可追踪校准报告
- 携带箱
- 隔板连接器(2)
- 快速电池充电器/电池同步器
- 10米光缆
- 电池舱盖备用螺丝
- 手册
产品图表

Graphs for Uploading

Graphs for Uploading

Graphs for Uploading
Key Features
- Frequency Response:?10?kHz to 1?GHz?
- Dynamic Range:?2.0?to 800 V/m?
- Provides Individual and Summed Axis Values
- A2LA Accredited Calibration Report?
- Suitable for MIL Standard Specs:
- MIL-STD 461F Radiated Susceptibility (RS)?
- Suitable for Automotive Specs1:
- ?SAE J1113/27
- GMW 3091/3097/3103
- Suitable for Commercial Specs:
- EN/IEC61000-4-3 Radiated Immunity
- Operates with Most 3rd Party Immunity Software
1 For High Field and High Frequency Requirements, the HI-6053 is Recommended
Specifications
Electrical Specifications
Detection:?Isotropic (X, Y and Z Axis Readings)
Frequency Range:?10?kHz to 1?GHz
Frequency Response:
- 10?kHz to 30 kHz +0.5, -2.5 dB
- 30 kHz to?1?GHz ± 1.0 dB
Frequency Response with Correction:?10?kHz to 1.0?GHz ± 0.9 dB
Dynamic Range:?2?to 800 V/m (Single Range)
Resolution:?0.01 V/m
Isotropic Deviation:?± 0.5 dB @ 400 MHz
Linearity:?± 0.5 dB?(2-800 V/m)
Sample Rate (Typical):?70 Samples/Second Maximum
Overload Withstand:?>1500 V/m CW
Physical Specifications
Physical Interface:?Duplex Optical Fiber (200 Micron Multimode); FSMA Connectors. Integral 1m Optical Cable
Battery:?4.8 V NiMH, up to 8 Hours of operation
Cubical Housing Height:?32 mm (1.26 in)
Other Specifications
- HI-6023 Probe
- A2LA Traceable Calibration Report
- Carrying Case
- Bulkhead Connector (2)
- Fast Battery Charger/Battery Synchronizer
- 10 m Optical Cable
- Spare Screws for Battery Hatch
- Manual
Product Charts

Graphs for Uploading

Graphs for Uploading

Graphs for Uploading


















