- 在光纤类型丰富的变异(HPI-A6 / A6F / S6 / S20)
在独立使用“验电”,“相和异相的,相序,”接收和在声音和光透射显示的组合! - 光纤绝缘性能高,安全!
绝缘棒作为标准配置,即使是高压裸线也可以安全使用 - 可以用涂层线测量!*没有屏蔽电缆
- 请使用“HPI-A6F”作为地下隔间
- 使用的电池:每个电池5个(R1或LR1)2个(共4个)
- 可选的光纤电缆可以检测最远30米的距离
- 也可以制造HPI-S11型(11kV)。请联系您的销售代表。
? Multi-functional phase tester: Voltage Detection by single detector use, Phase detection / phase sequence
check with pair detector use
? Measurement is possible on the insulated wire sheath.
Testing operation is possible through voltage detection terminals or on the wire insulation.
* Cannot be used on the shielded cable.
? In-phase/different phase, and phase sequence are indicated by sound and light indications.
型号 | HPI-A6 | HPI-S6 | HPI-S20 | |
工作电压范围 | 3kV~7kV | 6.6kV | 22kV~34.5kV | |
用途 | 小隔间(狭小空间) | 架空线 | ||
频率 | 50/60Hz | |||
绝缘电阻 | 2000MΩor more | |||
电介质强度 | 20 kV, 1 min | 75 kV, 1 min | ||
操作温度范围 | -10℃~+40℃ | |||
操作显示 | 灯光 | 它可以达到8000lux的亮度。 | ||
声音 | 在距发声部分1米的距离处50分贝或更多(间歇发声) | |||
相位测试功能 | 120°同相或双相干相位的检测 | |||
相序功能 | 120°提前或延迟的检测 | |||
相位测试的可能距离 | 发射机与接收机之间的距离,标准光缆:6米(3米×2) | |||
它可以使用长达30米的光缆。 | ||||
电池 | R1(1.5V), 各 2 个 |
Model | HPI-A6 | HPI-S6 | HPI-S20 | |
Working voltage range | 3kV~7kV | 6.6kV | 22kV~34.5kV | |
Target | For cubicles | For overhead lines | ||
Frequency | 50/60Hz | |||
Insulation resistance | 2000MΩor more | |||
Dielectric strength | 20 kV, 1 min | 75 kV, 1 min | ||
Operating temperature range | -10℃~+40℃ | |||
Indication of operation | Light | It shall be able to con?rm luminance of 8,000 lux. | ||
Sound | 50 dB or more at a distance of 1 m from the sound-generating part (intermittent sound generation) | |||
Phase test function | Detection of in-phase or di?erent phase of 120° | |||
Phase sequence function | Detection of advance or delay of 120° | |||
Possible distance of phase test | Distance between transmitter and receiver, with standard optical cable: 6 m (3m×2) | |||
It can be used at up to 30 m with the optional optical cable. | ||||
Battery | R1(1.5V), each 2 pcs |