- 常规铁路
高速列车专用线·新干线高压使用电压范围:AC 20 kV至80.5 kV - 等待指示功能(后约2分钟点亮绿色测试/验电动作)
只是电路电池正常确认之前①验电能够
②显示非充电验电后[操作示例] ①测试(红色发射和发音)→②待机(绿灯亮),检测③充电(红色发光/发音),不充电(绿灯亮) - 伸缩式伸缩约1.4米,约1公斤轻型,可操作性好!通过调整检测部分的角度来提高可视性!
Y形金属配件也可用于检测部件(HST-W80JS-Y1型)
- 使用的电池:LR44(1.5 V)x 2
配件:储物袋
? Standby display function is provided.
After pressing the test button, the green LED lights up even after voltage detection.
* The green LED automatically turns off in 1 to 2 min.
Voltage detection is possible even after turning off (in case there is no problem with battery level)
工作电压范围 | AC20kV~80.5kV | |
操作启动电压 | 5 kV ± 20% (裸线) | |
频率 | 50Hz/60Hz | |
操作显示 | 灯光 | 它可以在8000lux的亮度下得到确认。 |
声音 | 距离2米时50分贝或更多 | |
电介质强度 | 绝缘棒,交流75kV/300mm×1分钟。 (绝缘棒上的6个位置,电极和接头除外) | |
泄露电流 | 100μA或更低的介电强度测试/1位置 | |
电池 | LR44(1.5V)? × 2 个 | |
电池寿命 | 大约4小时。连续操作 | |
操作温度范围 | ?10°C to +50°C (但是内部不应有露水凝结。) | |
重量 | 约 1 公斤 |
Working voltage range | AC20kV~80.5kV | |
Operation starting voltage (Voltage to ground) | 5 kV ± 20% (bare wire) | |
Frequency | 50Hz/60Hz | |
Indication of operation | Light | It can be confirmed in the luminance of 8,000 lux. |
Sound | 50 dB or more at a distance of 2 m | |
Dielectric strength | Insulating stick, AC 75 kV/300mm x 1 min. (6 locations on the insulating stick, except for electrode and joints) | |
Leakage current | 100 μA or less at dielectric strength test/1 location | |
Battery | LR44(1.5V)? × 2 pcs | |
Battery life | About 4 hr. continuous operation | |
Operating temperature range | ?10°C to +50°C (However, there shall be no dew condensation inside.) | |
Weight | About 1 kg |