karam安全带用带挂绳附件

Suspension Intolerance Strap

Ref : STS 01(N)

The KARAM Suspension intolerance Strap can be used by a victim of fall to combat ill effects of Suspension Trauma , while he waits for his rescue, suspended in his harness. This strap is provided placed inside 2 light weight zipped pouches , which can be conveniently worn on the Thigh Straps on both left & right sides of the Harness withthe help of textile loop & Velcro.

In the event of a fall , the victim can easily zip-open the pouches & attach together the deployed webbing straps with the help of convenient buckle.

Tools Lanyard

Ref : TL 01(N)

Accidents are also known to occur when tools fall from the hand of a worker who is using them while working at a height.KARAM introduces a new TOOL Lanyard which can be connected to the belt of the Harness at one end & has a loop at the other end to hold a tool of weight of upto 10kg.

• Made of 20mm wide Tubular Webbing.
• Convenient stretch-lanyard for Tool Holding.
• Provided with a light-weight karabiner for attachment to the user’s belt.
• Can hold tools upto 10kg.
• Relaxed Length : 85cm
• Expended Length : 135cm
• Also Available in Fluorescent Orange / Green Colour

Twin Tools Lanyard

Ref : TL 02(N)

Accidents are also known to occur when tools fall from the hand of a worker who is using them while working at a height.KARAM introduces a new TOOL Lanyard which can be connected to the belt of the Harness at one end & has a loop at the other end to hold a tool of weight of upto 10kg.

• This lanyard comes as a bright coloured elasticated 16mm tubular webbing, having a relaxed length of 85 cm (so that the lanyard does not unnecessarily come in the way while working), and extended length of 135cm (to allow maximum reach while using the tool).
• The Y-shaped lanyard allows the user to attach and carry 2 tools.
• The Lanyard can be easily attached to the Waist belt of the Harness with the help of a light-weight Karabiner.
• Convenient ‘Y’stretch-Lanyard for Tool Holding.
• Provided with a light-weight Karabiner for attachment to the user’s belt.
• Can holds Tools up to 10kg.

Retractable Tools Lanyard

Ref : TL 03

Retractable Tools Lanyard specifically designed to prevent unwanted sag & entanglingduring work. This Light weight & easy to use Lanyard also has a Push type releasemechanism to retract the lanyard back safely into the casing when not in use

• Light weight & easy to use
• Can easily be mounted on harness or belt
• Locks at the desired length for preventing unwanted sag & entangling
• Material : High impact resistant polymer casing
• Lanyard material: Polyester Rope of dia 5mm
• Provided with Light weight Connector at termination end
• Can hold tools weighing upto 2.5 kgs
• Maximum Extended Length: 1mtr

Easy Seat

Ref : IMP 004

This accessory by KARAM can be attached to KARAM Harnesses – Magna 3, PN56 & PN57 having a central D-ring at the waist level (ventral) to which the Karabiner is attached. When done , the Easy Seat provides a comfortable seating for extended time during long hours of work , suspended at a height.

• The Aluminium re-enforcement in the Easy-seat makes it robust yet light in weight, weighing not more than 1.3 Kg.
• The loops at the end of the polyester webbing straps can be easily attached to the ventral D-ring of the Harnesses mentioned.
• Straps are adjustable
• 3 equipped loops
• Easy positioned on the back when not in use.
• Soft cushioned sides prevents the webbing straps from cutting into the thighs
• The webbing straps have a breaking strength of more than 23 kN.
• Ergonomic & comfortable working chair.
• Aluminium reinforcement inside

DESIGN

• To be used as an accessory with Harness having a Ventral D-ring at the waist level to which the karabiner is attached.
• Ergonomic & Comfortable working chair.
• Aluminium reinforcement inside

WEBBING

• Material – Polyester
• Width – 44 ± 1mm
• Breaking Strength – 23kN

METAL COMPONENTS

• Material – High strength steel
• Finish – Black Powder Coated
• Weight – 1280 gm ± 1