Project Description

Wide Range Distribution Grip

KT4650

  • Versatile grip hold a wider range of ACSR cable sizes reducing the number of grips needed
  • Round jaw provides maximum contact with the cable minimizing deformation
  • Large handle opening accommodates a wide variety of hooks on hoists, winches, and tackle blocks
  • Max Safe Load of 5000-Pound (2268 kg)

宽范围分配夹具

KT4650

  • 多功能手柄可容纳更广泛的ACSR电缆尺寸,减少了所需的夹具数量
  • 圆形钳口可 接触电缆,从而减小损坏
  • 大手柄开口可容纳提升机,绞车和滑车组件上的各种挂钩
  • 最大安全载荷5000磅(2268千克)

The newest grip from Klein Tools features a large jaw opening that can accommodate a wide range of cable types and sizes. It also has both a ”V” groove shaped jaw and a round jaw. The large handle opening accepts many size hooks used on hoists, winches, and tackle blocks.

Specifications
Type:
Wide Range Distribution Grip
Application:
Large Range of Cables
Special Features:
Spring
Overall Length:
11.25” (285.8 mm)
Overall Height:
1.797” (45.6 mm)
Overall Width:
4.5” (114.3 mm)
Cable Type:
ACSR
Cable Diameter:
0.16” to 0.90” (4.06 to 22.86 mm)
Jaw Type:
Round – Serrated
Jaw Length:
4.5” (114.3 mm)
Maximum Safe Load:
5000 lb (2268 kg)
Weight:
4.4 lb (2.0 kg)
UPC:
092644477591
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/or near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.

Klein Tools的手柄具有一个大钳口,可以容纳各种类型和尺寸的电缆。它还有一个”V”槽形钳口和一个圆形钳口。大手柄开口可接受用于起重机,绞车和滑车组件的多种尺寸的吊钩。

产品规格
类型:
宽范围分配夹具
应用:
大范围的电缆
特殊功能:
弹簧
总长度:
11.25”(285.8 mm)
总体高度:
1.797”(45.6 mm)
总宽度:
4.5英寸(114.3毫米)
电缆类型:
钢芯铝绞线
电缆直径:
0.16”到0.90”(4.06到22.86 mm)
颚类型:
圆形 – 锯齿形
下颚长度:
4.5英寸(114.3毫米)
最大安全载荷:
5000磅(2268千克)
重量:
4.4磅(2.0千克)
UPC:
092644477591
警告
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时,在通电线路上/附近使用,接地,绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装,而不是用于永久性锚固。