Project Description

Parallel Jaw Grip 4800 Series

KT4800

  • Securely pulls 0.700 – 1.25-Inch (17.78 – 31/75 mm) diameter ACSR cables
  • Large eyelet opening in the handle to accommodate a wide variety of hooks on hoists, winches and tackle blocks
  • Round jaw provides maximum contact with the cable minimizing deformation
  • Max Safe Load of 12,000-Pound (5443 kg)
  • Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product

平行钳夹4800系列

KT4800

  • 牢固地拉动直径为0.700 – 1.25英寸(17.78 – 31/75 mm)的ACSR电缆
  • 手柄上有一个大孔眼,可容纳升降机,绞车和滑车组件上的各种钩子
  • 圆形钳口可接触电缆,从而减小损坏
  • 最大安全载荷12,000磅(5443千克)
  • Klein为产品的正常使用寿命提供材料缺陷和工艺保修

Klein Tools has been manufacturing high quality grips for more than 135 years. Klein Parallel Jaw Grips are lightweight and compact. They can pull an exceptionally wide range of cable types and sizes.

Specifications
Special Features:
Spring
Cable Type:
ACSR
Cable Diameter:
0.70” to 1.25” (17.78 to 31.75 mm)
Jaw Type:
Round – Serrated
Jaw Length:
5.125” (130.2 mm)
Maximum Safe Load:
12,000 lb (5443 kg)
Weight:
9.0 lb (4.1 kg)
UPC:
092644477560
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.

Klein Parallel Jaw Grips轻巧紧凑。它们可以提供种类繁多的电缆类型和尺寸。

产品规格
特殊功能:
弹簧
电缆类型:
钢芯铝绞线
电缆直径:
0.70”至1.25”(17.78至31.75 mm)
颚类型:
圆形 – 锯齿形
下颚长度:
5.125”(130.2 mm)
最大安全载荷:
12,000磅(5443千克)
重量:
9.0磅(4.1千克)
UPC:
092644477560
警告
  • 每次使用前,清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用,接地,绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装,而不是用于永久性锚固。