Stray Voltage Detector
The Stray Voltage Detector, model LV-5, is used to detect stray voltage as low as 5 volts which may be present on any electrically conductive surface such as street light poles, guide guy wires, wood transmission poles, meter cans, manhole covers and many other metallic surfaces in and around electrical utilities. This newer LV-5 has a bigger, more robust grip, a brighter LED indication that improves daylight visibility and has a tester built into the holster to quickly test the detector on a known voltage source before and after use. Otherwise it operates the same as the LV-S-5. The Detector operates by holding it with a bare or gloved hand and directly contacting the metal tip of the Detector to the potentially energized source. The LV-5/K01 is supplied with a belt clip holster, allowing the user to carry the LV-5 in the holster on their belt. The holster also includes an integrated tester that supplies a low voltage AC signal for testing the LV-5 before and after use.
Two optional accessories are available for the LV-5. The Extension Handle extends to the reach of the LV-5, allowing the Tester to test equipment on the ground or hard to reach locations. The Ground Shield is used in areas where high voltage lines or other energized conductors are present.
Stray Voltage Detector Features
- Low threshold voltage sensing design picks up voltages from 5 VAC to 600 VAC with direct contact and above 600 VAC at a distance
- Ultra bright, long-lasting red LED indicates when voltage is present
- Detector is always on, ready to use, and operates on two AA alkaline batteries (batteries required)
- Rugged, utility-grade design is waterproof
- Tester integrated into the holster provides a visual indication of the test. Supples a low voltage AC signal for testing before and after use
- Optional Extension Handle extends the Detector’s reach for testing equipment on or near the ground or other hard to reach locations
- Optional Ground Shield used in areas where energized conductors are present and interfere with normal voltage tests
HD Electric Company is committed to ongoing review and improvement of its product lines, and thus reserves the right to modify product design and specifications without notice.
杂散电压检测器
LV-5型杂散电压检测器用于检测低至5伏的杂散电压,这些杂散电压可能出现在任何导电表面上,例如路灯杆,导向线,木质传输杆,仪表罐,井盖和电力设施内部和周围的许多其他金属表面。这款新型LV-5具有更大,更坚固的握把,更明亮的LED指示,可提高日光可见度,并在皮套内置测试仪,可在使用前后快速测试已知电压源上的探测器。否则它的操作与LV-S-5相同。探测器通过裸露或带手套的手握住它并直接接触探测器的金属尖端到可能通电的源来操作。LV-5 / K01配有皮带夹皮套,允许用户将LV-5放在皮带上的皮套中。
LV-5有两个可选配件。扩展手柄延伸到LV-5的范围,允许测试仪测试地面或难以到达位置的设备。接地屏蔽用于存在高压线路或其他带电导体的区域。
杂散电压检测器功能
- 低阈值电压检测设计可在直接接触和高于600 VAC的距离下从5 VAC至600 VAC采集电压
- 亮,持久的红色LED指示电压何时出现
- 探测器始终处于开启状态,可随时使用,并使用两节AA碱性电池供电(需要电池)
- 坚固耐用的实用级设计具有防水功能
- 集成在皮套中的测试仪提供了测试的视觉指示。在使用前后支持低压交流信号进行测试
- 可选的扩展手柄扩展了探测器的范围,可以测试地面上或附近或其他难以到达的位置的设备
- 可选的接地屏蔽用于存在带电导体的区域,并干扰正常电压测试
HD Electric Company致力于不断审查和改进其产品线,因此保留修改产品设计和规格的权利,恕不另行通知。