ORC150 直线管延伸唇弹性绝缘罩

lIne Hose
extended Lip sU system

The ExTENdEd lIP Su SYSTEm is the only complete flexible
cover-up available for use on voltages through 34.5 kV. extremely
versatile, it may be installed by hand, wearing rubber insulating gloves,
from an insulated aerial device or platform, or with hot sticks using
the sU applicators.

manufactured from superior SAlCOR Type ii elastomer, it is resistant
to the effects of ozone and ultraviolet deterioration. it remains flexible
even at sub-zero temperatures.

salisbury’s RIB-gRIP construction securely interlocks with its
corresponding covers and connectors. Tapered lips facilitate easy
starting on the conductors. The contour cut ends accommodate the
skirts of pin type insulators and permit the hose to cover the line snug
to a saddle or clamp.

available as STRAIgHT lINE HOSE or with a connector end
for easier connection of line hose and covers. a lifting eye is molded
on the connector end for removal with hot sticks. Line hose is also
available with the #2323 shot Gun eye assembly. Just add a suffix
of “e” to the catalog number to order the #2323 shot Gun assembly
installed on the hose or order the #2323 separately.

neW Su 150 SERIES mOldEd dESIgN the new molded
design makes for a consistent overall profile, offers greater electrical
insulation between the connector and line hose and since the serrations
are also molded an improved locking system.

Su SYSTEm CONNECTORS are made from orange saLcor
Type ii. riB-GriP construction is used to ensure a strong lock to the
straight lengths of sU system Line Hose and covers. The uC2 is
used to connect extended Lip Hose to PTHL and LrG insulator covers,
or134 Dead end Protectors, and 2” (51 mm) and 2.5” (64 mm) sU
system and conventional Line Hose.

Cat. no. DImensIons — ft. (mm) WeIgHt ea.
I.D. Length lbs. ( kgs)
sTraiGHT Line Hose cLass 4, TyPe ii
*Su150-3 1.5” (38) 3’ (915) 6 (2.7)
*Su150-45 1.5” (38) 4.5’ (1372) 8.5 (3.8)
*Su150-6 1.5” (38) 6’ (1829) 12 (5.4)
Su200-3 2” (51) 3’ (915) 6 (2.7)
Su200-45 2” (51) 4.5’ (1372) 10 (4.5)
Su200-6 2” (51) 6’ (1829) 14 (6.4)
Su250-3 2.5” (63.5) 3’ (915) 7 (3.2)
Su250-45 2.5” (63.5) 4.5’ (1372) 11 (5.0)
Su250-6 2.5” (63.5) 6’ (1829) 15 (6.8)

connecTor enD Line Hose cLass 4, TyPe ii
*Su150-3C 1.5” (38) 3’ (915) 7 (3.2)
*Su150-45C 1.5” (38) 4.5’ (1372) 9 (4.1)
*Su150-6C 1.5” (38) 6’ (1829) 12 (5.4)

sU sysTem connecTors cLass 4, TyPe ii asTm D1049
Length x Height Use w/ Line Hose i.D.
uC 10.5” x 6” (263 x 150) 1.5” (40) 2 (.9)
uC2 10.5” x 7.75” (263 x 194) 2”&2.5” (51&64) 3 (1.4)
add suffix “e” to Catalog number to order with #2323 shot gun eye
assembly (see page B-12).
example: su200-45e is a 2” ID x 4.5’ Line Hose with a shot gun
assembly attached
* moLDeD onCe pIeCe DesIgn

comPLies wiTH cUrrenT asTm D1050 sPeciFicaTions.

THE ExTENdEd lIP Su SYSTEm may be installed by
using rubber gloves or hot sticks on distribution voltages up to 34.5kV.

The shot Gun eye assembly for the sU system equipment may be
purchased separately for installation on the appropriate cover-up device.

The addition of these eye assemblies enable all sU system equipment
to be easily handled with a standard shotgun stick.

Cat. no. DesCrIptIon for use W/ WeIgHt ea.
Hot stICK styLe lbs. (kgs)
2323 shot Gun eye assembly for sU Hose / or134 shot Gun 1 (.4)
2359 eye assembly for sU system insulator covers shot Gun .5 (.2)

shotgun assembly allows easy installation