Chicago Grip Hot-Line 0.31 to 0.53-Inch

S1656-30H

  • Chicago Grip-with Hot-Line Latch for Bare Conductors has round inside-jaw contour
  • Jaw length: 4-7/8-Inch
  • Maximum safe load of 4,500 pounds
  • Standard hot-line grips are not supplied with springs or lock-open features
  • Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product

Chicago Grip Hot-Line 0.31至0.53英寸

S1656-30H

  • Chicago Grip-with Hot Line Line for Bare Conductors具有圆形内颚轮廓
  • 下颌长度：4-7 / 8英寸
  • 安全载荷为4,500磅
  • 标准热线夹具不提供弹簧或锁定打开功能
  • Klein为产品的正常使用寿命提供材料缺陷和工艺保修

The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors is for both bare and insulated conductors. The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.

Specifications
Type:
Hot-Line Latch Chicago Grip
Application:
Bare and Insulated Conductors
Special Features:
Round Inside-Jaw Contour
Cable Type:
Copper, ACSR, AAC
Cable Diameter:
0.1” to 0.53” (7.87 to 13.46 mm)
Jaw Type:
Round
Jaw Length:
4.75” (120.7 mm)
Maximum Safe Load:
4500 lb (2041 kg)
Weight:
4 lb (1.81 kg)
UPC:
092644471094
WARNINGS
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.

用于裸导线的Klein S1656-30H芝加哥夹具带热线锁扣适用于裸导线和绝缘导线。用于裸导线的Klein S1656-30H Chicago Grip-with Hot-Line Latch可以用热线棒放在电线上。当取下斗杆时，闩锁会??自动关闭，以防止抓地意外脱离钢丝。

产品规格
类型：
Hot-Line Latch Chicago Grip
应用：
裸露和绝缘导体
特殊功能：
圆形内颚轮廓
电缆类型：
铜，ACSR，AAC
电缆直径：
0.1英寸至0.53英寸（7.87至13.46毫米）
颚类型：
圆
下颚长度：
4.75英寸（120.7毫米）
安全载荷：
4500磅（2041千克）
重量：
4磅（1.81千克）
UPC：
092644471094
警告
  • 每次使用前，清洁钳口区域并检查手柄是否正确操作以避免滑动。
  • 在拉动时在通电线上/附近使用，接地，绝缘或隔离手柄。
  • 不要超过额定容量。
  • 始终将适当尺寸和类型的手柄与应用相匹配。
  • 把手用于临时安装，而不是用于永久性锚固。