Chicago Grip, Forged, Hot-Line, .218 to .55-Inch
S1684-5H
- Works with Aircraft, EHS, Messenger, Guy Strand cable
- Double V inside-jaw contour
- Maximum Safe Load: 8000-Pound (3629 kg)
- Standard hot-line grips are not supplied with springs or lock-open features
- Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
- Jaw length: 5-Inch
Chicago Grip，Forged，Hot-Line，.218 to .55-Inch
S1684-5H
- 适用于飞机，EHS，Messenger，Guy Strand电缆
- 双V内颚轮廓
- 最大安全载荷：8000磅（3629千克）
- 标准热线夹具不提供弹簧或锁定打开功能
- Klein为产品的正常使用寿命提供材料缺陷和工艺保修
- 下颚长度：5英寸
The Klein S1684-5H Chicago Grip-with Hot-Line Latch for Bare Conductors are for both bare and insulated conductors . The Klein S1684-5H Chicago Grip-with Hot-Line Latch for Bare Conductors grip may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
Specifications
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218” to 0.55” (5.54 to 13.97 mm)
Jaw Type:
Double V
Jaw Length:
5” (127.0 mm)
Maximum Safe Load:
8000 lb (3629 kg) EHS Specific
Weight:
6.7 lb (3.0 kg)
UPC:
092644471681
WARNINGS
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
用于裸导线的Klein S1684-5H Chicago Grip-with Hot-Line Latch适用于裸导线和绝缘导线。Klein S1684-5H Chicago Grip-with热线闩锁用于裸导线夹具可以用热线棒放在电线上。当取下斗杆时，闩锁会??自动关闭，以防止抓地意外脱离钢丝。
产品规格
电缆类型：
飞机，EHS，信使，Guy Strand
电缆直径：
0.218英寸至0.55英寸（5.54至13.97毫米）
颚类型：
双V
下颚长度：
5”（127.0 mm）
最大安全载荷：
8000磅（3629千克）EHS特定
重量：
6.7磅（3.0千克）
UPC：
092644471681
警告
- 每次使用前，清洁钳口区域并检查手柄是否正确操作以避免滑动。
- 在拉动时在通电线上/附近使用，接地，绝缘或隔离手柄。
- 不要超过额定容量。
- 始终将适当尺寸和类型的手柄与应用相匹配。
- 把手用于临时安装，而不是用于永久性锚固。
