Curved Jaw Grip for EHS Cable with Latch
S1684-74H
- When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip
- To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double ”V” contour
- Available with hot-line latch and spring
带闩锁的EHS电缆弯曲钳口
S1684-74H
- 当拉EHS（特别高强度）镀锌钢电缆时，镀锌会有夹钳的钳口涂层，导致电缆滑动
- 为了减少滑动和损坏电缆的可能性，该手柄的钳口铣削成具有双“V”轮廓的曲线
- 提供热线锁和弹簧
Specifications
Type:
Curved Jaw Grip
Application:
Extra High Strength Galvanized Steel Cable
Special Features:
Latch
Overall Length:
9” (228.9 mm)
Overall Height:
2.25” (57.2 mm)
Overall Width:
7.203” (183 mm)
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218” to 0.55” (5.54 to 13.97 mm)
Jaw Type:
Double V, Milled Curved
Jaw Length:
5” (127.0 mm)
Weight:
6.45 lb (2.93 kg)
UPC:
092644471735
WARNINGS
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
产品规格
类型：
弯曲的下颌握把
应用：
特别高强度镀锌钢缆
特殊功能：
闩
总长度：
9”（228.9 mm）
总体高度：
2.25英寸（57.2毫米）
总宽度：
7.203”（183毫米）
电缆类型：
飞机，EHS，信使，Guy Strand
电缆直径：
0.218英寸至0.55英寸（5.54至13.97毫米）
颚类型：
双V，铣削曲面
下颚长度：
5”（127.0 mm）
重量：
6.45磅（2.93千克）
UPC：
092644471735
警告
- 每次使用前，清洁钳口区域并检查手柄是否正确操作以避免滑动。
- 在拉动时在通电线上/附近使用，接地，绝缘或隔离手柄。
- 不要超过额定容量。
- 始终将适当尺寸和类型的手柄与应用相匹配。
- 把手用于临时安装，而不是用于永久性锚固。
