针对污水应用修复了非侵入式夹钳式测量解决方案

  • 用于“脏”液体监测
  • 适合13mm-4500mm的管道
  • 非侵入性传感
  • 使用方便
  • 防水外壳
  • RFI拒绝滤波器
  • 信号强度指标
  • 回流保护

Fixed non-invasive, clamp-on, measurement solution for dirty water applications

  • For “dirty” liquid monitoring
  • To suit pipes 13mm-4500mm
  • Non-invasive sensing
  • Easy to use
  • Watertight enclosure
  • RFI rejection Filters
  • Signal strength Indicator
  • Backflow protection
管道范围：- > 13mm至4.5m
电源输入：- 100-240VAC，50 / 60Hz，最大3watts
流量范围：- 在大多数应用中-12.2m / s至12m / s
精度：- +/- 2％全面的。需要最小尺寸100微米的固体或气泡，最小浓度75ppm
重复性：- +/- 0.1％
线性度：- 满量程的+/- 0.5％
显示：- 白色，背光矩阵 - 显示流量，累加器，继电器状态，操作模式和校准菜单
输出：- 隔离/ 4-20mA（最大1000欧姆负载）5amp额定SPDT继电器，可编程流量报警和/或比例脉冲。可调灵敏度和阻尼
电子工作温度：-23°C至+ 60°C
传感器工作温度：- -40°至+ 93°C（-40°至200°F）
选项：-9-32VDC。SE3H高温型号额定温度高达150°C，ISE插入型适用于特殊应用。用于室外安装的外壳加热器，16瓦恒温控制到-40°C
数据记录器：- 内置200万点记录器，带USB输出和Windows软件。
Pipe Range:– >13mm up to 4.5m
Power Input:– 100–240VAC, 50/60Hz, 3watts max
Flow Rate Range:– -12.2m/s to 12m/s in most applications
Accuracy:– +/-2% of full scale. Requires solids or bubbles of minimum size 100 microns, minimum concentration 75ppm
Repeatability:– +/- 0.1%
Linearity:– +/-0.5% of full scale
Display:– White, backlit matrix – displays flow rate, totalizer, relay states, operating mode and calibration menu
Output:– Isolated/4–20mA (1000ohm load max.) 5amp rated SPDT relays, programmable flow alarms and/or proportional pulse. Adjustable sensitivity and damping
Electronics Operating Temp:– -23°C to +60°C
Sensor Operating Temp:– -40° to +93°C (-40° to 200°F)
Options:–9-32VDC. SE3H High Temperature model rated up to 150°C, ISE Insertion type for special applications.Enclosure Heaterfor outdoor installation, 16watt thermostatically control to -40°C
Data Logger:– Built-in 2 million point logger with USB output and Windows software.